60EN
EDITING(Cont.)
Brand Setting
Before you can perform Random Assemble Editing
VCR (Recording deck)(☞ pg. 61 – 63), or control the VCR using the remote control, you must set the VCR brand.
3
T W
SHIFT MBR SET
12
64 5
7 8 9 `
SET REMOTE/VCR CODE
Before operation, make sure the lithium battery is installed in the remote control (☞ pg. 16).
1 SET REMOTE TO OPERATE VCR Turn off the power to the VCR and point the remote towards the VCR’s infrared sensor. Then, referring to the VCR CODE LIST on the left, press and hold MBR SET, and press button
(A) and then (B).
•The code is automatically set once you release the MBR SET button, and the VCR’s power comes on.
2 OPERATE VCR
Make sure the VCR’s power is on. Then, while holding SHIFT, press the button on the remote for the desired function. The functions the remote can control are PLAY, STOP, PAUSE, FF, REW and VCR REC STBY (you don’t need to
VCR CODE LIST
VCR BRAND | BUTTONS |
NAME | (A) (B) |
AKAI | 6 2 |
| 6 4 |
| 7 7 |
BLAUPUNKT | 1 3 |
FERGUSON | 9 7 |
| 9 8 |
| 3 2 |
GRUNDIG | 1 4 |
| 3 4 |
HITACHI | 6 6 |
| 6 3 |
JVC A | 9 1 |
B | 9 6 |
C | 9 3 |
MITSUBISHI | 6 7 |
| 6 8 |
NEC | 3 7 |
| 3 8 |
PANASONIC | 1 3 |
| 1 7 |
| 1 1 |
| 9 4 |
| 1 8 |
VCR BRAND | BUTTONS | |
NAME |
| (A) (B) |
PHILIPS |
| 1 9 |
|
| 9 5 |
|
| 1 1 |
|
| 9 4 |
|
| 9 1 |
|
| 9 6 |
|
| 1 2 |
|
| 3 3 |
|
| 7 2 |
SANYO | 3 6 | |
| 3 5 | |
SELECO, |
| 9 1 |
REX |
| 9 6 |
SHARP |
| 1 5 |
|
| 1 ` |
SONY |
| 6 5 |
|
| 6 ` |
|
| 3 9 |
|
| 3 1 |
THOMSON, | 9 1 | |
TELEFUNKEN, |
| 9 6 |
SABA, |
| 9 7 |
NORDMENDE |
| 3 2 |
TOSHIBA |
| 6 9 |
|
| 6 1 |
press SHIFT for this one).
You’re now ready to try Random Assemble Editing.
IMPORTANT
Although the MBR is compatible with JVC VCRs and those of many other makers, it may not work with yours or may offer limited functions.
NOTES:
●If the VCR’s power doesn’t come on in step 1, try another code from the VCR CODE LIST.
●Some brands of VCR don’t come on automati- cally. In this case, turn the power on manually and try step 2.
●If the remote control is not able to control the VCR, use the controls on the VCR.
●When the remote control's battery runs out, the VCR brand you have set will be erased.
In that case, replace the old battery with a new one to reset the VCR brand.