16ENRECORDINGBasicRecording
LENS COVER Switch
Power indicator
Power Switch
Start/Stop Button
Tally lamp
(lights while recording is in progress)
NOTE:
You should already have performed the procedures listed below. If not, do so before continuing.
●Power (☞ pg. 8)
●Recording Mode/Tape Length Setting (☞ pg. 12)
●Grip Adjustment (☞ pg. 14)
LOAD A CASSETTE
1 Slide EJECT to open the cassette holder, then insert the cassette with the label facing out. Press PUSH to ensure the holder is closed and locked.
ENTER RECORD-STANDBY MODE
2 Slide the LENS COVER Open/Close Switch to open the lens cover, then set the Power Switch to
CAMERA.
•The power indicator lights and the camcorder enters the
•The scene you’re aimed at appears on the viewfinder screen, with the word “PAUSE” superimposed upon it.
START SHOOTING
3 Press the Recording Start/Stop Button.
•“REC ” appears in the viewfinder while recording is in progress.