JVC GR-DVL512 specifications Display, EN51, Playback Sound

Menu Screen Explanations (cont.)

SYSTEM	Each setting is linked with “		DISPLAY” or
	“	SYSTEM”, which appears when the Power
	Switch is set to “ ” ( pg. 48, 49).
DISPLAY	The parameters are the same as in the
	description on pg. 48, 49.

DISPLAY

ON SCREEN setting:

12B I T / SOUND1 SP 46

EN51

100-0001

1 / 50

MEMORY
pg. 28 – 36

For playback sound, tape	For directory, file name,
speed and tape running	index number and total
during video playback.	number during D.S.C.
	playback.
DATE/TIME setting:

DEC 25 ’01

DEC 25 ’01 5 : 30 PM

For date during D.S.C. playback.

For date/time during video playback.

TIME CODE setting: For time code.

Minutes

Seconds

Frames*

*30 frames = 1 second

12 : 34 : 24

PLAYBACK SOUND

During video playback, the camcorder detects the sound mode in which the recording was made, and plays the sound back. Select the type of sound to accompany your playback picture. According to the menu access explanation on pg. 50, select “SOUND MODE” or “12BIT MODE” from the Menu Screen and set it to the desired parameter.

		STEREO	Sound is output on both “L” and “R” channels in stereo.
SOUND MODE		SOUND L	Sound from the “L” channel is output in stereo.
		SOUND R	Sound from the “R” channel is output in stereo.
		MIX	Original and dubbed sounds are combined and output in stereo on
12BIT MODE			both “L” and “R” channels in stereo.
		SOUND 1	Original sound is output on both “L” and “R” channels in stereo.
		SOUND 2	Dubbed sound is output on both “L” and “R” channels in stereo.
	: Factory-preset

NOTES:

●The “SOUND MODE” setting is available for both 12-bit and 16-bit sound. (In previous models’ functions, “12-bit” is called “32 kHz” and “16-bit” is called “48 kHz”.)

●The camcorder cannot detect the sound mode in which the recording was made during fast-forward or rewind. During playback the sound mode is displayed in the upper left corner.