JVC LYT0002-0W3A, GR-DVX 2LTD manual Picture Wipe function doesn’t work

Page 69

EN 69

SYMPTOM

POSSIBLE CAUSES

CORRECTIVE ACTION

19.The Picture Wipe and Dissolve functions don’t work.

19.•The last selected editing scene is ending.

•At the end of the last selected scene for editing, the Power Dial was set to “OFF”.

•The power is off.

19.•Select Picture Wipe or Dissolve before beginning recording. The effects are then automatically

activated (pg. 38). •Do not turn off the

camcorder’s power after setting Edit-In and Edit-Out points, as they will all be erased (pg. 38).

•The camcorder automatically shuts off after 5 minutes have elapsed in the Record- Standby mode. Make sure you continue operations within

5 minutes after engaging Record-Standby mode (pg. 38).

20.The Picture Wipe function doesn’t work.

20.•The Slow (Slow Shutter) effect is activated.

•The Squeeze or Cinema mode is selected in the Recording Menu.

20.•Make sure the Squeeze mode, Cinema mode, or Slow effect is not activated when preparing to use the

Picture Wipe function (pg. 31, 43).

21.Even when Slow (Slow Shutter) isn't selected, the image looks like it is activated.

21.•When shooting in the dark with GAIN UP set to A, the unit becomes highly sensitive to light and the image takes on an effect similar to Slow (Slow Shutter).

21.•If you want the lighting to look more natural, set GAIN UP to “AGC” or

“OFF” in the Recording Menu (pg. 32).

22.The Video Echo effect doesn’t work.

22.•The Picture Wipe or Dissolve functions are in use.

•The Squeeze mode is selected in the Recording Menu.

•Snapshot Dissolve is in progress.

•A Fade-In or Fade-Out is in progress (White Fader, Black Fader or Black & White Fader).

22.•Make sure the Squeeze mode is set to “OFF”

(pg. 31).

•Do not try to use the Video Echo effect during a Fade-In or Fade-Out

(pg. 36).

23. There is no strobe when

 

23. •The Picture Wipe or

 

23. •Do not try to use the

the Classic Film and

 

Dissolve functions are in

 

Classic Film or Strobe

Strobe effects are

 

use.

 

effects during a scene

activated.

 

•Snapshot Dissolve is in

 

transition (pg. 43).

 

 

progress.

 

 

24. White Balance cannot be

 

24. •The Sepia or Monotone

 

24. •Turn off Sepia or Monotone

activated.

 

effects are activated.

 

before setting White

 

 

•Snapshot Dissolve is in

 

Balance (pg. 42).

 

 

progress.

 

•Wait until the Snapshot

 

 

 

 

Dissolve is finished before

 

 

 

 

setting White Balance

 

 

 

 

(pg. 25).

 

 

 

 

 

 

 

 

 

CONTINUED ON NEXT PAGE

Image 69
Contents Instructions It is recommended that you Dear CustomerSafety Precautions DC cord EN P Rovided a CCE SsoriesLithium battery CR2025 Remote control unit RM-V711UFor remote control unit DV30MESub-Code Area Video Area Audio AreaITI Insert and Tracking Information Area Contents Detach BATTERY/BATTERIES Charging The Battery PackAttach DetachOpen Battery Cover Installing The Battery PackInsert Battery Close Battery CoverFirst. Close the battery cover Supply PowerAttach to Camcorder Knob and insertSelect Operation Mode Date/Time SettingsInput Date and Time LCD monitorLoading/Unloading a Cassette OPEN/EJECT switchOpen Cassette Cover INSERT/REMOVE TapeRecording Mode Setting SET Recording ModeSet depending on your preference PUT Camcorder Attach Hand StrapClose Flap During transportingGrip Strap Attachment Adjust LengthTripod Mounting Attach Grip Strap to Hand Strap EyeletDioptre Adjustment Adjust DioptreTurn on Camcorder Installing The Battery Remote Control UnitPull OUT Battery Holder Insert Battery in HolderPower Dial Position Function Operation ModePull OUT Viewfinder or Open LCD Monitor Basic RecordingStart Recording Stop RecordingEngage Still Mode Recording From The Middle Of a TapeStart Search Time Code When blank portion is recorded on a tapeProper recording During shootingAdjust Brightness Tape Remaining IndicatorBrightness Control Brightness indication appears in the LCD monitorInterface Shooting Journalistic shootingOpen LCD Monitor Tilt LCD MonitorZoom RE COR DIN GChanging the Snapshot Setting Motor Drive modeSnapshot Take SnapshotSelect Function Snapshot Flash Auto FlashSelect Mode Adjusting Flash BrightnessAccessmenu Manual Mode Item Access Flash AdjustmentDissolves during 5 second mode recording Engage 5S ModeTo Take a Snapshot In The 5-Second Mode Scene 5-second recordingStop SELF-TIMER Recording Self-TimerEND SELF-TIMER Recording To Take a Snapshot In The Self-Timer ModeClose Recording Menu MenusRecording Menu allows you to set these functions Please refer to page 31, 32 for detailsWide Mode REC Mode Recording modeZoom Zoom magnification DIS Digital Image StabilizerFlash pg Displaying The Date And Time During Recording Access System Menu System MenuClose System Menu Return Sound signals can be sampled at 32 kHz or 48 kHzTo Cancel FADE/WIPE Effects Access FADER/WIPE MenuFADE/WIPE Effects Select EffectExample WH Fades and WipesExample Fader WhitePicture Wipe/Dissolve Resume RecordingP and P of the Fader/Wipe Menu Random Variations Fade in or out with a black screen Fade in or out with a white screenFade out from colour to black and white Fade in or out with a full-screen mosaic effectDisappears New scene gradually appears as the old one graduallyNew scene wipes in over the previous one from the upper Right corner to the lower left cornerAE/Effects Disable P.AE/EFFECTStrobe Classic FilmTwilight SepiaAccess Manual Focus Manual Focus AdjustmentAdjust Focus To Change To Auto FocusExposure Control Adjust ExposureBrightness control of the LCD monitor To Return To Automatic Exposure ControlIris Lock After , adjust the exposure rotatingTo Return To Automatic Iris Control IrisAccessment White Balance Adjust White Balance AdjustmentClosement White Balance Adjust Select Auto in . Or set the Power Dial toExit Manual White Balance Adjustment Enter SettingManual White Balance Operation To Change The Tint For RecordingRewind Tape Volume switchViewing Recording END PlaybackActivate Zoom Playback ZoomLocatescene Portion of Magnified END ZoomSelect P.AE/EFFECT Playback EffectsRM-V711U Start Playback Press the Play buttonPlayback Menu Access Playback MenuClose Menu Playback Menu allows you to set the following functionsPlayback Sound Displaying the Date During PlaybackDisplaying The Time Code During Playback Turn on Power VCR/TV Connection when connecting directly to the camcorderSelect TV’S Video Mode Turn the Power Dial to Play and turn on the TV/VCRVCR/TV Connection using Docking Station Confirm POWER-OFF Status Supply PowerAttach and Locks Video OUT VCR/TV connection using the Docking StationEquipped with an S-VIDEO Connection to a TV or VCRAnd/or A/V input RCA Connect Docking Station to TV or VCRMake Connections Start Playback DubbingPause Recording VCR Recording deckBrand Setting Operate the VCR VCR Code ListRM-V711U 9 ` provided Make Connections Random Assemble EditingStart Source Playback Execute FADE/WIPE in if NecessarySET EDIT-OUT Point SET EDIT-IN PointUSE Fade Wipe on Scene Transition if Necessary USE P.AE/EFFECT if NecessaryStart Editing Engagemode Vcrs RECORD-PAUSEStop Editing ButtonFor More Accurate Editing Prepare for R.A. Edit Play Back Dubbed SceneChoose a Scene Press MENU. The Playback Menu appears on the TV screen Input Correction DataFind EDIT-IN Point Audio DubbingBegin Dubbing Pause During DubbingFind Edit OUT Point Insert EditingFind Edit in Point Pause During Editing5S or Battery pgTape END appears Replace with new cassetteEN TR Ouble Shooting Picture Wipe function doesn’t work Squeeze or Cinema mode is selected in the Recording MenuEnd of its service life, images Same time Cleaning The Camcorder Camcorder Power dial pg OPEN/EJECT switch pgRBATTERY cover pg IND.ON/OFF button pgDocking Station Function LCD Monitor/Viewfinder Indications During RecordingAppears during recording Appears while the tape is running Brightness of the flashLCD Monitor/Viewfinder Indications During Playback Indications Function Avoid using the unit For safety, do notTo avoid hazard To prevent damage to the camcorderDo not leave the unit To prolong service lifeTo protect the unit, do not To prevent damage to the LCD monitor, do notPower consumption PowerSignal format Video signal recording formatAC Adapter Colour temperatureAuto focus On-screen displayLithium Battery Pg , 3 Second Mode Fade-In/OutMotor Drive Mode Animation Audio DubbingVictor Company of JAPAN, Limited