JVC GR-DVM75 specifications 94 EN

Page 94

94 EN

Memory Cards

To properly use and store your memory cards, be sure to read the following cautions:

1. During use . . .

.... make sure the memory card bears the SD or

MultiMediaCard mark.

.... make sure the memory card is positioned

properly when inserting.

2.While the memory card is being accessed (during recording, playback, deletion, initialization, etc.) . . .

.... never unload the memory card and never turn

off the camcorder.

3. Store memory cards . . .

.... away from heaters or other heat sources.

.... out of direct sunlight.

.... where they won’t be subject to unnecessary

shock or vibration.

.... where they won’t be exposed to strong

magnetic fields (such as those generated by motors, transformers or magnets).

LCD Monitor

1.To prevent damage to the LCD monitor, DO NOT . . .

.... push it strongly or apply any shocks.

.... place the camcorder with the LCD monitor on

the bottom.

2. To prolong service life . . .

.... avoid rubbing it with coarse cloth.

3.Be aware of the following phenomena for LCD monitor use.

These are not malfunctions:

•While using the camcorder, the surface around the LCD monitor and/or the back of the LCD monitor may heat up.

•If you leave power on for a long time, the surface around the LCD monitor becomes hot.

Main Unit

1. For safety, DO NOT . . .

.... open the camcorder’s chassis.

.... disassemble or modify the unit.

.... short-circuit the terminals of the battery pack.

Keep it away from metallic objects when not in use.

.... allow inflammables, water or metallic objects

to enter the unit.

.... remove the battery pack or disconnect the

power supply while the power is on.

.... leave the battery pack attached when the

camcorder is not in use.

2. Avoid using the unit . . .

.... in places subject to excessive humidity or dust.

.... in places subject to soot or steam such as near

a cooking stove.

CAUTIONS (cont.)

.... in places subject to excessive shock or vibration.

.... near a television set.

.... near appliances generating strong magnetic or

electric fields (speakers, broadcasting anten- nas, etc.).

.... in places subject to extremely high (over 40°C

or 104°F) or extremely low (under 0°C or 32°F) temperatures.

3. DO NOT leave the unit . . .

.... in places of over 50°C (122°F).

.... in places where humidity is extremely low

(below 35%) or extremely high (above 80%).

.... in direct sunlight.

.... in a closed car in summer.

.... near a heater.

4.To protect the unit, DO NOT . . .

.... allow it to become wet.

.... drop the unit or strike it against hard objects.

.... subject it to shock or excessive vibration during transportation.

.... keep the lens directed at extremely bright objects for long periods.

.... expose the lens to direct sunlight.

.... carry it by holding the LCD monitor or the viewfinder.

.... swing it excessively when using the hand strap or the grip.

.... swing the soft camera case excessively when the camcorder is inside it.

5.Dirty heads can cause the following problems:

•No picture during playback.

•Blocks of noise appear during playback.

•During recording, the Head Clog Warning indicator “” appears.

In such cases, use an optional cleaning cassette. Insert it and play back. If the cassette is used more than once consecutively, damage to the video heads may result. After the camcorder plays back for about 20 seconds, it stops automatically. Also refer to the cleaning cassette’s instructions.

If, after using the cleaning cassette, the problems still exist, consult your nearest JVC dealer. Mechanical moving parts used to move the video heads and video tape tend to become dirty and worn out over time. In order to maintain a clear picture at all times, periodic check-ups are recommended after using the unit for about 1,000 hours. For periodic check-ups please consult your nearest JVC dealer.

Page 93 Page 95
Image 94
Page 93 Page 95
Contents GR-DVM75 GR-DVM55 Dear Customer It is recommended that youImportant Safety Instructions Safety Precautions Memory Card AC Adapter AP-V10URM-V717U GR-DVM55 CU-V505 USB Cable GR-DVM75 onlyGR-DVM75 only Power Switch Lock Button Menu Wheel Sub MenuGetting Started Getting StartedCharge Lamp Power Switch PowerCharging the Battery Pack Battery pack To DC AC Adapter ConnectorApproximate recording time Using the Battery PackUsing AC Power To AC outlet10 EN Grip AdjustmentViewfinder Adjustment Tripod MountingPower lamp Date/Time SettingsEN11 12 EN Switch Erase protection tabApproximate recording time Tape Recording mode Loading/Unloading a CassetteLP mode Recording Mode SettingEN13 Card Cover 14 ENTo Unload a Memory Card LabelImage Size Mode Setting GR-DVM75 only EN15VIDEO/DSC Switch Position GR-DVM75 only Operation ModePower Switch Position Manual 16 ENVideo Recording & Playback Video Recording PlaybackVideo Recording 18 ENBasic Recording Self-Recording EN19Journalistic Shooting Zoom20 EN When a blank portion is recorded on a tapeProper recording Video Playback To Control The Speaker VolumeAvailable only with the remote control provided  pg Normal Playback22 EN ConnectionsEN23 SwitchJack Box Attachment Blank Search To cancel Blank Search midway24 EN Press FOCUS/BLANKDigital Still Camera D.S.C Recording Playback Basic Shooting Snapshot Snapshot Mode Selection26 EN Snapshot RecordingTo Delete Unwanted Still Images EN27To Remove The Shutter Sound Perform steps 1 and 2 above Press 4/6 28 ENAuto Playback Of Images To end Auto Playback, pressIndex Screen Index Playback 30 ENJump Playback To Protect a File Protecting FilesEN31 To Remove ProtectionDeleting Files 32 ENTo Select a File by Browsing Files Stored in Memory To Delete the Displayed File EN33To Delete ALL Files 34 EN To Reset The SettingVIDEO/DSC Switch Power Switch Lock Button Menu Wheel To Print ALL Still Images ONE Print for EachEN35 To Reset The No. Of PrintsPower Switch Lock Button Menu Wheel To Print by Selecting Still Images and NO. of PrintsInitialising a Memory Card VIDEO/DSC Switch Power Switch Lock Button36 EN You can initialise a memory card anytimeAdvanced Features For RecordingIf you have selected WIPE/FADER Program AE or W. Balance EN Using Menus for Detailed AdjustmentFor Recording Menu …see pgEN39 Menu Screen ExplanationsDemo Mode remains on even if the camcorder power is turned Refer to Flash Brightness Adjustment  pgDemo Mode is set to on and the Menu Screen is closed Normal screen ratioEN41 GR-DVM75 onlyFor Playback Menu Display EN43 pg Sound Mode 12BIT Mode Playback SoundNight-Alive NIGHT-ALIVE Button Power Switch Lock ButtonFor Recording EN4546 EN Selected mode indicator appearsTo Deactivate The Selected Mode Program AE With Special EffectsVariable Shutter Speed 1/250 1/4000 EN47Shutter Variable Shutter Speed Slow Slow ShutterFade/Wipe Effects Recording Start/Stop Button Power Switch Menu Wheel48 EN FADE/WIPE SelectionFader And Wipe Menu EN49Menu Effect Snapshot For Video Recording Motor Drive Mode50 EN If you press during Record-StandbyEN51 Feature Auto FocusFeature Manual Focus To obtain correct focusExposure Control 52 ENIris Lock EN53 White Balance AdjustmentManual White Balance Operation To Return To Automatic White BalanceSnapshot Flash GR-DVM75 only 54 ENIf Auto Is Selected EN55 Flash Brightness Adjustment GR-DVM75 onlyManual Menu 56 EN Sound Effect Mode SelectionTo cancel recording the sound effect midway Sound Effect RecordingFor GR-DVM75 Owners DubbingDubbing To Or From a VCR EN5758 EN DubbingIndicator disappears when dubbing is complete Power Switch toEN59 60 EN Play/Pause Button 4/6 VIDEO/DSC SwitchVideo Menu EN61 To cancel E-Mail Clip RecordingTo view video clips stored in a memory card 62 EN Installing The BatteriesRemote sensor Buttons EN63Functions Feature Playback Zoom Feature Slow-Motion PlaybackFeature Frame-By-Frame Playback 64 ENEN65 Feature Playback Special EffectsEffect Select Menu Audio Dubbing 66 ENTo hear the dubbed sound during playback EN67 Audio Dubbing Using Digital Sound Effects GR-DVM75 onlyPress Stop 5 to end Audio Dubbing 68 EN Insert EditingSET REMOTE/VCR Code EN69VCR Recording deck 70 EN Make ConnectionsProgram EN71Select Scenes RandomRecording Start/Stop Button 72 ENAutomatic Editing to VCR Editing MenuEN73 Adjustment of VCR/CAMCORDER TimingFor More Accurate Editing Diagnosing VCR/CAMCORDER TimingUsing USB or PC connection cable Using USB or PC connection cableUsing DV cable Using DV cableEN75 Connection To a Video Unit Equipped With a DV ConnectorVideo unit equipped with a DV connector Digital Printer76 EN ReferencesDetails EN7778 EN Corrective ActionEN79 Corrective ActionTroubleshooting 80 ENEN81 82 EN VideoEN83 84 EN User MaintenanceCleaning The Camcorder After UseEN85 GR-DVM75 CU-V506 GR-DVM55 CU-V50586 EN EIUEN87 Displays the selected Fade/Wipe effect  pg 88 ENRotates while the tape is running EN89 LCD Monitor/Viewfinder Indications During Video Playback EN91 Switch is set to  pg When the memory card is not formattedWhile the Power Switch is set to or and the VIDEO/DSC Switch is set toTemperature Range Specifications EN9394 EN EN95 96 EN Sound Mode  pg , 42 EN9798 EN EN99

GR-DVM75 specifications

The JVC GR-DVM75 is a digital camcorder that represents a significant leap forward in home video technology at its launch. Designed for both amateur videographers and enthusiasts, this model integrates a variety of features and technologies that enhance the shooting experience while ensuring high-quality video output.

One of the standout aspects of the GR-DVM75 is its 690,000 pixel CCD sensor, which delivers impressive image clarity and detail. This camcorder offers a 16:9 aspect ratio for widescreen shooting, allowing users to capture cinematic-style footage that is well suited for modern viewing formats. The camcorder's 10x optical zoom lens lets users get close to their subjects without sacrificing image quality, while a digital zoom feature extends this range up to 800x, providing flexibility in different shooting environments.

The GR-DVM75 is equipped with JVC's proprietary Digital Image Stabilization technology, which minimizes the effects of camera shake, resulting in smoother video playback. This feature is particularly useful in handheld shooting scenarios or when capturing moving subjects. Additionally, the camcorder supports various recording formats, including MiniDV, ensuring compatibility with a wide range of playback devices.

The model also boasts a swivel LCD screen, allowing for easy framing of shots from various angles. This 2.5-inch screen is bright and clear, providing a reliable visual reference for users. Moreover, the camcorder incorporates a viewfinder for traditional shooting styles, catering to diverse preferences among users.

Connectivity is another crucial aspect of the GR-DVM75. The camcorder features Firewire (IEEE 1394) and USB ports that facilitate fast data transfer for easy editing and sharing of videos. This functionality is vital in today's digital age, where content creation and sharing on various platforms have become commonplace.

In terms of audio capabilities, the JVC GR-DVM75 is equipped with a built-in stereo microphone that captures clear sound, supplemented by audio input options for external microphones. This feature is especially beneficial for users looking to enhance their sound quality, whether for interviews or ambient sound capture.

Overall, the JVC GR-DVM75 combines cutting-edge technology with user-friendly features, making it an excellent choice for anyone looking to capture high-quality home videos. Its blend of image stabilization, versatility in recording, and robust connectivity options set it apart as a reliable tool for creative expression. Whether someone is documenting family events, creating travel vlogs, or exploring artistic videography, the GR-DVM75 provides a solid foundation for captivating storytelling.
Top Page Image Contents