JVC GR-SXM58, GR-SX24, GR-SXM48, GR-FXM383, GR-FX14 manual Automatic Demonstration, Dear Customer

INSTRUCTIONS ENGLISH LYT0860-001B

COMPACT VHS CAMCORDER

GR-SXM58 GR-SXM48 GR-FXM383 GR-FXM38 GR-SX24 GR-FX14

VHS

PAL

625

S-VHS is compatible with GR-SXM58/SXM48/SX24 only

Printed in Malaysia

EG 1001MKV*UN*PJ

COPYRIGHT© 2001 VICTOR COMPANY OF JAPAN, LTD

Dear Customer,

Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read “PRECAUTIONS” (
pg. 3, 4) to ensure safe use of this product.

AUTOMATIC DEMONSTRATION

Automatic Demonstration takes place when “DEMO MODE” is set to “ON” (factory-preset).

• Available when the Power Switch @ is set to “ ” or “ ”.

•Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 1 minute after that, the demonstration will resume.

•“DEMO MODE” remains “ON” even if the camcorder power is turned off.

•To cancel Automatic Demonstration, set the Power Switch @ to “ ” and press the MENU Wheel 1 in while the demo is in progress. This takes you directly to the demo mode’s Setting Menu (so you will not have to go through the main Menu Screen). Rotate the MENU Wheel 1 to select “OFF” and press it.

NOTES:

•When a tape whose Erase Protection tab is in the position that allows recording is loaded in the camcorder, demonstration is not available.

•If you do not detach the Lens Cap, you cannot see the actual changes of the Automatic Demonstration activated on the LCD monitor* or viewfinder.

* Applicable models only.

1