50
EN
USER
MAINTENANCE
After Use
LENS COVER Open/Close Ring
BATTERY RELEASE
Set to “OFF”.
Remove.
PUSH Button | EJECT Switch |
|
|
|
| Remove. |
|
|
|
|
|
PUSH Button | EJECT Switch | |||
1 Turn off the camcorder.
2 Open the LCD monitor* fully. Slide EJECT to open the cassette holder, then remove the cassette.
3 Press PUSH to close and lock the cassette holder.
4 Close and lock the LCD monitor*.
5 Slide BATTERY RELEASE to remove the battery pack.
6 Turn the LENS COVER Open/Close Ring to close the lens cover.
Cleaning The Camcorder
1 To clean the exterior, wipe gently with a soft cloth. Put the cloth in diluted mild soap and wring it well to wipe off heavy dirt. Then wipe again with a dry cloth.
2 Open the LCD monitor* and wipe gently with a soft cloth. Be careful not to damage the monitor*. Close the LCD monitor*.
3 To clean the lens, blow it with a blower brush, then wipe gently with lens cleaning paper.
4 To detach the eyepiece, turn it counterclockwise and pull it out.
5 Remove dust from the viewfinder using a blower brush.
6
*GR-SXM320 only.
NOTES:
●Avoid using strong cleaning agents such as benzine or alcohol.
●Cleaning should be done only after the battery pack has been removed or other power units have been disconnected.
●Mold may form if the lens is left dirty.
●When using a cleaner or chemically treated cloth refer to the cautions of each product.
●When removing the eyepiece, be sure to hold the viewfinder securely.