JVC GR-SXM337UM, GR-SXM737UM specifications Using the battery pack, To remove the battery pack

6EN

SUPPLY POWER

QUICKOPERATIONGUIDE

INSERTING A VIDEO

CASSETTE

AHook on.

B Push in.

PUSH Button EJECT Switch

BATTERY RELEASE

Using the battery pack

Hook its end to the camcorder and push the battery pack in until it locks in place . (Charging procedure, ☞ pg. 8)

To remove the battery pack

Slide BATTERY RELEASE and pull out the battery pack.

1Open the LCD monitor fully.

2Slide EJECT to open the cassette holder.

3 Insert a video cassette.

4 Press PUSH to close the cassette holder. (For more details, ☞ pg. 13)

PLAYBACK

2Rewind (2) Button

3ButtonPlay/Pause (4/6)

Stop (5) Button	1 Set to
	“PLAY”.

1Set the Power Switch to “PLAY”.

2 Press 2.

—The tape will automatically stop at the beginning of the tape.

3Press 4/6.

—Playback starts and the playback picture appears.

•To stop playback, press 5. (For more details, ☞ pg. 35.)

•The viewfinder switches off automatically to save power when the LCD monitor is opened at an angle of over 60 degrees.

•The LCD monitor turns on/off when it is opened/closed at approx. 60 degrees.

Or simply play back the tape on a VHS VCR

using the Cassette Adapter (VHS Playpak). ☞ pg. 37

SHOOTING

1

LENS COVER

Open/Close Ring

2

Set to “AUTO” or “PRO.”.

3Recording Start/Stop Button

1 Turn the LENS COVER Open/Close Ring to open the lens cover.

2Set the Power Switch to “AUTO” or “PRO.”.

—The power lamp will light and an image will appear.

3Press the Recording Start/Stop Button.

— Recording starts.

•To stop recording temporarily, momentarily press the Recording Start/Stop Button once again.

(For more details, ☞ pgs. 18, 19)

•The viewfinder switches off automatically to save power when the LCD monitor is opened at an angle of over 60 degrees.

•The LCD monitor turns on/off when it is opened/closed at approx. 60 degrees.