JVC GR-SXM525 specifications Recording Format Setting

Select Wheel

Power Switch

MENU Button

Display: when a VHS cassette is loaded.

EN13

Recording Format Setting

Set the recording format according to the format of the tape used or type of recording you wish to perform.

1 Set the Power Switch to “PRO.”. Press MENU.

2 If a VHS cassette is loaded . . .

.... rotate the Select Wheel to move the highlight bar

to “S-VHS ET”, then press it. The S-VHS ET Setting Menu appears.

If an S-VHS cassette is loaded . . .

.... rotate the Select Wheel to move the highlight bar

to “S-VHS”, then press it. The S-VHS Setting Menu appears.

3 Rotate the Select Wheel to set to either of the parameters, then press it. The highlight bar moves to “EXIT”.

4NEX T	ON
D . ZOOM
TE L E MACRO	OF F
S – VHS E T	OF F
TAPE L ENGTH	T 3 0
4RE TURN

Menu Screen

When an S-VHS cassette is loaded: S-VHS

In the S-VHS ET Setting Menu,

ON : Records with S-VHS picture quality on a VHS cassette (factory-preset). This is called Super VHS ET (Expansion Technology).

OFF : Records in VHS.

In the S-VHS Setting Menu,

ON : Records in S-VHS on an S-VHS cassette

S – VHS E T

		Setting Menu
ON
OF F
EX I T
T EL E MACRO	OF F
TAPE L ENGTH	T 3 0	Menu Screen

4RE TURN

Normal Screen

(factory-preset).

OFF : Records in VHS on an S-VHS cassette.

4 Press the Select Wheel. The Menu Screen reappears with the highlight bar on “RETURN”. Press the Select Wheel again to close the Menu Screen.

•When the S-VHS ET mode is engaged, “S-ET” is displayed.

•During S-VHS record mode, “S“ is displayed. •When S-VHS ET or S-VHS recording starts, “S-VHS

REC.” is displayed for approx. 3 seconds.

NOTE:

If a cassette is not loaded, “S-VHS” will be displayed in the Menu Screen.

CONTINUED ON NEXT PAGE.