6EN
Slot
GETTINGSTARTED(cont.)
Clock (Lithium) Battery Insertion/Removal
This battery is necessary for clock operation and to perform date/time settings.
1
| 2 |
Battery holder | 3 |
| |
| 4 |
SWITCH OFF POWER
Switch off the unit’s power and remove the power supply unit (battery pack, AC Power Adapter/Battery Charger, etc.).
REMOVE BATTERY HOLDER
Pull out the battery holder.
INSERT BATTERY IN HOLDER
Insert the battery in the holder, and be sure to have the “+” mark visible.
RE-INSERT HOLDER
Slide the holder back into the slot until you hear a click.
NOTES:
●See “SAFETY PRECAUTIONS” (☞ pg. 2) for information on safe handling of lithium batteries.
●To avoid losing the battery and/or battery holder, place the camcorder with the grip side up as shown in the illustration when inserting/removing the battery.