
MasterPage: Body_Left M5E3PAL_04Basic.fm Page 26 Tuesday, June 14, 2005 2:40 PM
26 EN VIDEO RECORDING & PLAYBACK
Connecting to a TV or VCR | ● Set the video out select switch of the cable | ||
adapter as required: | |||
|
| Y/C: When connecting to a TV or VCR which | |
| To S connector | accepts Y/C signals and uses an | |
|
| CVBS: When connecting to a TV or VCR which | |
|
| does not accept Y/C signals and uses a video | |
Open the |
| cable. | |
| ● Make sure you adjust the TV sound volume to its | ||
cover. |
| minimum level to avoid a sudden burst of sound | |
|
| when the camera is turned on. | |
To AV connector |
| Playback on a TV | |
|
| 1 Make sure all units are turned off. | |
AV Cable | S Cable | 2 Connect the camera to a TV or VCR as | |
(optional) | |||
(provided) | shown in the illustration. | ||
| |||
|
| If using a VCR, go to step 3. | |
|
| If not, go to step 4. | |
|
| 3 Connect the VCR output to the TV input, | |
|
| referring to your VCR’s instruction manual. | |
|
| 4 Turn on the camera, the VCR and the TV. | |
|
| 5 Set the VCR to its AUX input mode, and set | |
“Y/C” / “CVBS” |
| the TV to its VIDEO mode. | |
Cable Adapter* | 6 Start playback on the camera. ( pg. 24) | ||
Video Out Select | |||
|
Switch
To choose whether or not the following displays appear on the connected TV
To TV or VCR
A White to AUDIO L IN** B Red to AUDIO R IN**
C Yellow to VIDEO IN (Connect when your TV/ VCR has only A/V input connectors.)
D Black to
*If your TV/VCR has a SCART connector, use the provided cable adapter.
**Not required for watching still images only.
NOTES:
●The
●It is recommended to use the AC adapter as the power supply instead of the battery pack. ( pg. 16)
●Date/Time
Set [DATE/TIME] to [AUTO], [ON] or [OFF]. ( pg. 48, 49)
●Counter
Set [SCENE COUNTER] to [ON] or [OFF]. ( pg. 48, 49)
(Pressing INFO/ button also turns on/off the displays.)
Dubbing to a VCR (or DVD Recorder)
The following explains how to dub to a VCR. When dubbing to a DVD recorder, refer to its instruction manual.
1 Perform steps 1 to 6 above.
2 At the point you want to start dubbing, start recording on the VCR. (Refer to the VCR’s instruction manual.)
3 To stop dubbing, stop recording on the VCR, then stop playback on the camera.