JVC GZ-MG505AG Set the file unit ALL or File to copy/move, 2Press Menu, To stop the file transfer

Copying/Moving Still Image Files

Check which buttons to use in the illustration of “Controls in this section” on page 49.

You can copy or move still image files between the HDD and SD card using the on-screen display.

Preparation:

●Set the power switch to or .

●Make sure that SD card is inserted in the SD slot.

●Make sure that enough free space is left in the copy/move destination medium.

1

GAIN UP

CAMERA SETTING

BASIC SETTING

REC MEDIA SETTING

DATE/DISPLAY

QUALITY

SELF-TIMER

2 Select and set items as follows.

[REC MEDIA SETTING] [COPY/ MOVE]

Select

Set	COPY
	MOVE

3 Select the desired menu.

Select

Set

●[COPY]: Files are copied to the destination medium while leaving original files in the source medium.

●[MOVE]: Files are moved to the destination medium while deleting original files (except read-only files) in the source medium.

IMAGE COPY

MEDIA	HDD SD
FILE UNIT	ALL
NUMBER OF FILE	0059

EXECUTE

CANCEL

EN 53

4 Set the direction of copy/move. (HDD ] SD or SD ] HDD)

5

6 Set the file unit ([ALL] or [FILE]) to copy/move.

●[FILE]:

Select when you want to transfer the selected files.

1)Press / / / to select the desired file, then press 49.

•The mark appears on the file. To select other files, repeat this step.

2)Press MENU.

	● [ALL]:
	Select when you want to transfer all files in
7	the recording medium.	DUBBING
	Select
	Select [EXECUTE].

Set

●File transfer starts. When [COPYING (MOVING) COMPLETED] appears, press

49.

To stop the file transfer

Press 49, then select [EXECUTE] and press 49.