When Using an SD Card
By default, the HDD is set as the recording medium. If you want to record to an SD card, the following three operations need to be performed.
NOTE:
For details on compatible SD cards, see “Check the compatibility of recording media” ( pg. 3).
Insert an SD card
Insert and remove the SD card only while the power is turned off. Otherwise, data on the card may be corrupted.
1 Open the SD card cover.
Bottom of the
Camera
2 Firmly insert the card with its clipped edge first.
Clipped Edge
Do not touch the terminal on the reverse side of the label.
3 Close the SD card cover.
\
To remove an SD card
Push the SD card once.
After the card comes out a little, pull it out.
EN 17
Change the recording medium
Preparation:
●Set the power switch to or .
1
DIS
CAMERA SETTING | STARTED | ||
BASIC SETTING | |||
| |||
REC MEDIA SETTING |
| ||
DATE/DISPLAY |
| ||
REGISTER EVENT |
| ||
EXTERNAL MIC LEVEL | GETTING | ||
2 Select [REC MEDIA SETTING]. | |||
| |||
Select | COPY/MOVE |
| |
0 | NO. RESET |
|
Set | VIDEO MODE |
IMAGE MODE | |
| FORMAT |
| CLEAN UP |
3 Select [VIDEO MODE] or [IMAGE MODE].
Select
Set | SD |
| |
| HDD |
4 Select [SD].
Select
Set
5
To change the recording medium back to the HDD
Select [HDD] in step 4.
Format an SD card when using it for the first time
This will also ensure stable speeds and operation when accessing the SD card.
For details on how to format an SD card, see “Formatting a Recording Medium” ( pg. 41).