Version 1.10
Section III Long Length Fiber Cable connected Studio Configurations
Telecast Fiber
Telecast Fiber also produces a fiber connected CCU. Their system consists of a Camera Adapter(Copper Head) , a Power Module (Power Plus) connected to the
Base Station |
| Power Module |
|
|
| Camera Adapter |
| |
|
| Power Unit |
|
| ||||
|
|
|
|
|
|
|
|
|
SMPTE 311
HYBRID Cable
Telecast Fiber system with Power
The Camera Adapter provides a signal interface between the camera and the two fibers inside the Hybrid Cable. The Power module converts the 250V AC signal on the copper conductors inside the Hybrid cable to 12V Camera power. The two fibers within the cable handle the signal transmission between the camera and the base station.
One fiber strand is dedicated to carrying the
The second fiber strand carries all of the other required signals between the camera adapter and the base station.
Key Features and Customer Benefit
Up to 150Watts of power is supplied to the studio camera and attached accessories.
Telecast Fiber system can pass a both a SD VBS or a HD Tri level sync Genlock signal.
Flexibility of Hand held or Tripod mounted operation
24