Load a Cassette, Enter RECORD-STANDBY Mode

RECORDING Basic Recording

Tape remaining time indicator

25min			*---min
25min			*---min
			(Now calculating)

			60min

			59min
			59min

NOTE:

You should already have performed the procedures listed below. If not, do so before continuing.

●Power (☞ pg. 6)

●Date/Time Setting (☞ pg. 9)

●Tape Length Setting (☞ pg. 10)

●Recording Format Setting (☞ pg. 10)

●Grip Adjustment (☞ pg. 12)

Power indicator	3min
Power indicator
	2min (Blinking)
	1min (Blinking)
	0min (Blinking)

LENS COVER switch

POWER Start/Stop button

Tally lamp

LOAD A CASSETTE

1 Slide EJECT to open the cassette holder, then insert the cassette with the label facing out. Press PUSH to ensure the holder is closed and locked.

ENTER RECORD–STANDBY MODE

2 Slide the LENS COVER open/close switch to open the lens cover, then set the power switch to “CAMERA”.

•The power indicator lights and the camcorder enters the Record–Standby Mode.

•The scene you’re aimed at appears on the viewfinder screen, with the word “PAUSE” superimposed upon it.

START SHOOTING

3 Press the Start/Stop button.

•The tally lamp lights while recording is in progress, and “REC ” appears in the viewfinder.

STOP RECORDING

4 Press the Start/Stop button again to stop recording.

•The camcorder re-enters the Record-Standby mode.

NOTES:

●A cassette holder can’t be opened unless a power supply is attached.

●There may be a delay after you slide EJECT until the holder opens. Do not use force.

●The tape’s remaining time is displayed in the viewfinder as shown.

●The indicated remaining time is approximate.

●The time required to calculate the remaining tape length, and the accuracy of the calculation, may vary according to the type of tape used.

●The tape remaining time displayed in the viewfinder is correct only if the correct tape length has been selected (☞ pg. 10).

●“TAPE END” appears when the tape reaches its end, and the power goes off automatically if left in this condition for 5 minutes. “TAPE END” also appears when a cassette whose tape is already at its end is loaded.

●If the Record–Standby mode continues for 5 minutes without performing Zoom or any other operations, the camcorder’s power shuts off automatically. Set the Power switch to “POWER OFF”, and then back to “CAMERA” to turn the camcorder on again.

●If the Recording Start/Stop button is pressed after the Record-Standby mode has continued for over 5 minutes, recording may not start immediately.

●If you’re recording on a cassette from the middle, use the RETAKE function (☞ pg. 15) to find the end of the last recording so you don’t erase any of it.

●The LENS COVER warning blinks for about 10 seconds when the camcorder is turned on, when the cover is closed.

GR-SZ5000 specifications

The JVC GR-SZ5000 is a compact and versatile camcorder that emerged as a prominent model during the early 2000s. Combining user-friendly features with advanced technology, it quickly became a favorite among amateur videographers and professionals alike.

One of the standout features of the GR-SZ5000 is its impressive image quality. The camcorder utilizes a 1/6-inch CCD sensor, which enables it to capture clear and vibrant images. Coupled with a 10x optical zoom lens, users can easily zoom in on distant subjects without sacrificing clarity. The optical stabilization system further enhances image steadiness, making it ideal for handheld filming.

The design of the GR-SZ5000 is another significant highlight. Its lightweight and compact form factor make it easy to carry around for extended periods. The ergonomic grip and intuitive control layout ensure that users can operate the camcorder comfortably. The LCD viewfinder is also a major asset, offering bright and clear visuals for framing shots and reviewing footage.

Audio quality is as important as video quality, and the GR-SZ5000 excels in this area as well. It features a built-in stereo microphone that captures clear audio, and an external microphone input is available for those looking to enhance sound recording further. This flexibility allows videographers to customize their audio setup based on their project's specific needs.

For those who enjoy editing and sharing their videos, the GR-SZ5000 is equipped with various connection options, including audio/video output and a USB port. This feature facilitates easy transfers to computers for editing and archiving. Furthermore, it supports a range of recording formats, allowing users to choose the settings that best fit their creative vision.

In terms of battery life, the GR-SZ5000 is equipped with a reliable lithium-ion battery that provides ample shooting time for most projects. When it comes time to recharge, the camcorder features a quick-charge capability, ensuring that users won’t have to wait long to continue their shooting sessions.

Overall, the JVC GR-SZ5000 stands out with its combination of portability, quality optics, and user-friendly features. While it may be a model from an earlier era, it remains a valuable tool for anyone looking to capture high-quality video footage with ease. Whether for personal use or more serious videography projects, the GR-SZ5000 continues to leave a lasting impression.