Configuring the Camera Settings Appropriate for Your Needs
Specify the video format, zoom, etc. appropriate for your needs. Confi gure the settings on a browser.
Logging in as an administrator
1If the power is not turned on, press and hold the [POWER] button to power on.
The [POWER] button starts blinking. Wait until it stops blinking and stays lit.
2Set the Network Setting of the computer as follows.
IP Address: 192.168.1.2 to 192.168.1.254 (except 192.168.1.100) (example) 192.168.1.23
Subnet mask: 255.255.255.0
Make a note of the current network settings before operation for resetting the network setting.
3Start Internet Explorer, and enter "http://192.168.1.100:8000" in the address bar.
4Enter the user name and password of the administrator.
Initial setting: USERNAME "root", PASSWORD "password".
If login is successful, the setup screen appears.
Changing the settings
Select "NETWORK", "CAMERA/PAN TILTER", or "MANAGE" in the left window of the screen to change the settings. Click "+" on the left of each item to show the sub categories.
●"NETWORK"
•"WIRED NETWORK"
For establishing a wired connection.
•"WIRELESS NETWORK" For connecting wirelessly.
•"MONITORING SETTINGS" For connecting via a network.
•"STREAM SETTINGS"
Format for transmitting/recording.
●"CAMERA/PAN TILTER"
•"CAMERA SETTINGS" Camera settings such as zoom.
•"PAN TILTER SETTINGS"
Pantilter settings. Pan/Tilt is available when zooming is activated.
●"MANAGE"
•"COMMON SETTINGS" Change the password of the administrator, set the clock, etc.
•"MEDIA MANAGEMENT" Format the SD card.
•"TURN OFF CAMERA"
Turn off the power of the camera.
*The power cannot be turned on via the browser.
For details, refer to the "Detailed User Guide".
For more details, refer to the Detailed User Guide at http://manual3.jvckenwood.com/ | 11 |
GVLS1_basic_US.indd 11
12/08/08 9:36