JVC GR-AXM23 Recording pg, Lapse recording pg, Tally lamp remains off at all times, Setting is

			EN	29
REC TIME	This feature allows you to set the parameters for Animation and Time-Lapse
	recording (☞ pg. 35).
INT. TIME	This feature allows you to set the parameters for Self-Timer (☞ pg. 34) and Time-
	Lapse recording (☞ pg. 35).
TALLY LAMP	ON	The tally lamp comes on to signal the start of recording.
	OFF	The tally lamp remains off at all times.
CHARACTER	Allows you to enter an original title of up to 18 characters (☞ pg. 26).
JLIP ID NO.	This number is necessary when connecting the camcorder to a device such as a
	computer using the J terminal (JLIP). The numbers range from 01 to 99. Factory
	setting is 07.
DEMO MODE	OFF	Automatic demonstration will not take place.
	ON	Demonstrates certain functions such as the Fader, Instant Titles
		etc. When “DEMO MODE” is set to “ON” and the Menu Screen
		is closed, demonstration starts.

NOTES:

●When a tape whose Erase Protection tab is in the position that allows recording is loaded in the camcorder, demonstration is not available.

●By turning off the camcorder or inserting a tape whose Erase Protection tab is in the position that allows recording into it, “DEMO MODE” is set to “OFF” automatically.

●During demonstration, all functions except zoom are disabled.

= Factory setting and when the Select Dial is set to AUTO LOCK