JVC GR-AX767UM specifications Power, Battery pack

Page 8

8EN

Battery pack BN-V11U,

BN-V12U or BN-V20U

Marks

To AC outlet

CHARGE indicator

 

AC Power

 

Adapter/Charger

 

AA-V16U

DC OUT connector

 

 

Battery pack

Charging time

 

 

BN-V11U

approx. 1 hr. 10 min.

 

 

BN-V12U (optional)

approx. 1 hr. 10 min.

 

 

BN-V20U (optional)

approx. 1 hr. 50 min.

 

 

GETTINGSTARTED

Power

This camcorder’s 3-way power supply system lets you choose the most appropriate source of power. Do not use provided power supply units with other equipment.

CHARGING THE BATTERY PACK

1 Make sure you unplug the camcorder’s DC cord from the AC Power Adapter/Charger. Plug the AC Adapter/ Charger’s power cord into an AC outlet.

2 Align the marks and slide the battery pack in the direction of the arrow until it locks in place. The CHARGE indicator begins blinking to indicate charging has started.

3 When the CHARGE indicator stops blinking but stays lit, charging is finished. Slide the battery in the opposite direction of the arrow and lift off. Remember to unplug the AC Adapter/Charger’s power cord from the AC outlet.

Charge marker

ATTENTION:

Charging a battery with some charge remaining reduces that battery’s capacity. Perform the procedure below to fully discharge the battery pack before recharging.

1.Attach the battery pack to the camcorder and make sure a cassette is not inserted, then set the Power Switch to ”AUTO” or ”PRO.”.

2.The camcorder power turns off automatically when discharging is complete.

When you are not using a battery pack for a long period of time, be sure to fully discharge it before storing because leaving a battery with some charge left over also reduces performance.

Charge Marker

A charge marker is provided on the battery pack to help you remember whether it has been charged or not. Two colors are provided (red and black)—you choose which one means charged and which means discharged.

NOTES:

Perform charging where the temperature is between 10° and 35°C (50°F and 95°F). 20° to 25°C (68°F to 77°F) is the ideal temperature range for charging. If the environ- ment is too cold, charging may be incomplete.

Charging times noted above are for a fully discharged battery pack.

Charging time varies according to the ambient temperature and the status of the battery pack.

To avoid interference with reception, do not use the AC Power Adapter/Charger near a radio.

If you connect the camcorder’s DC cord to the adapter during battery charging, power is supplied to the camcorder and charging stops.

Since the AC Power Adapter/Charger processes electricity internally, it becomes warm during use. Be sure to use it only in well-ventilated areas.

When charging the battery pack for the first time or after a long storage period, the CHARGE indicator may not light. In this case, remove the battery pack from the AC Power Adapter/Charger, then try charging again.

If the battery operation time remains extremely short even after having been fully charged, the battery is worn out and needs to be replaced. Please purchase a new one.

Remember to set the charge marker after charging a battery pack or after detaching a discharged one from your camcorder.

Image 8
Contents GR-AX767UM Dear Customer It is recommended that youEN3 Important Product To avoid personal injury If the product has been dropped or damaged in any wayUsing the battery pack To remove the battery packCassettes marked can be used with this camcorder Major FeaturesAC Power Cassette Adapter VHS Playpak Charger P7U AA-V16U Power Battery packUsing the Battery Pack Slide Battery Release and pull out the battery packClock Lithium Battery Insertion/Removal 10 ENGetting Started Loading/Unloading a CassetteDate/Time Settings Press the Select Wheel to close the Menu ScreenEN Getting Started Recording Mode SettingTape Length Setting Grip Adjustment Viewfinder AdjustmentShoulder Strap Attachment Tripod MountingSwitches off the camcorder Basic RecordingViewfinder Indications EN Recording Basic Features Slide the Power Zoom Lever towards TZoom Zoom OutTo check the end of the last recording To re-record certain segmentsFade/Wipe Effects Fades in/out to a black screenCaptures faster action than Sports mode Nega Posi modeProgram AE With Special Effects High shutter speed clearly captures fast-moving actionRecording Advanced Features Using Menus For Detailed Adjustment20 EN Press the Select Wheel. The Menu Screen AppearsRefer to Focusing pg Subject becomes slightly dark. This setting is suitable forAdjustment Allows you to superimpose one of eight preset titles pgAdvanced Features 22 ENDate/Time Insert Instant Titles24 EN Exposure ControlAnimation Time-LapsePatterns that are regularly repeated Focusing26 EN White Balance Adjustment Select Auto in . Or set the Power Switch to AutoManual White Balance Operation Video light or similar type of lighting is used28 EN Playback Basic PlaybackPlayback Features EN29 Counter R/MEN Playback ConnectionsBasic Connections Connection For Tape DubbingIf using a VCR . . . go to step If not . . . go to step Tape DubbingCassette Adapter VHS Playpak Playback Using The Cassette Adapter32 EN User Maintenance Cleaning The Camcorder34 EN Review or Retake mode An error number i.e. E03 appearsLens Cover Warning indicator During recording, the indications do not appear36EN Diopter Adjustment Control Power Zoom Lever T/W Picture Stabilizer ButtonPower Switch Battery Release SwitchIndications 38 ENIndex Cassette Indicator Indications During PlaybackUse only the following battery P6U or C-P7U To prevent damage and prolong service life40 EN To avoid hazardFor safety, do not Avoid using the unitDuring use Store cassettesWide Mode Wipe-In/Out Zooming Manual Focus 42 ENPg , 9 Tape DubbingPower source Signal systemOperating Temperature Storage temperature -20C to 50CGR-AX767UM