![](/images/new-backgrounds/1218316/21831633x1.webp)
5 SEC. REC Button
RETAKE (2/3)
Button
Display
PAUSE
5 S
5 Sec. Rec mode indicator
EN17
FEATURE: Quick Review
PURPOSE:
To check the end of the last recording.
OPERATION:
1)Set the Power Switch to “CAMERA” (“AUTO” or “PRO.”).
2)Press 2 and release quickly during the Record– Standby mode.
■Tape is rewound for approx. 2 seconds and played back automatically, then pauses in
NOTE:
Distortion may occur at the start of playback. This is normal.
FEATURE: Retake
PURPOSE:
To re-record certain segments.
OPERATION:
1)Make sure the camcorder is in the
2)Press and hold either RETAKE to reach the start point for new recording. Pressing 3 forwards the tape and pressing 2 reverses it.
3)Press the Recording Start/Stop Button to start recording.
NOTE:
Noise bars appear and pictures may become monochrome or darken during Retake. This is normal.
FEATURE: 5Sec. Rec (5-sec. Recording)
PURPOSE:
To record a scene for 5 seconds, providing quick scene transitions like those seen in TV programs.
OPERATION:
■Make sure the recording mode is set to “SP”.
1)During 5S” appears and 5Sec. Rec is reserved.
2)Press the Recording Start/Stop Button. Recording starts, and after
■To cancel the 5Sec. Rec. function, press 5SEC. REC again so that “ 5S” disappears.
NOTE:
Fade/Wipe (☞ pg. 18) cannot be activated by pressing 5SEC. REC.