JVC GR-AXM237UM specifications Indications During Playback, Cassette Indicator

Indications During Playback

1	2	3 4 5 6
			SP	4
TBC
		–	1 : 2	3 : 4 5
				AT

	EN	39
1 Cassette Indicator
Displayed when a tape is loaded.
2 TBC Indicator	☞ pg. 29
3 Tape Counter	☞ pg. 29
4 Recording Mode Indicator (SP/EP)	☞ pg. 12

5Tape Running Indicator 4 : Playback

3 : Fast-Forward/Shuttle Search

2 : Rewind/Shuttle Search

6 : Pause
6 Tracking Indicator	☞ pg. 29
7 •BRIGHT: Bright Level Indicator	☞ pg. 28
•VOLUME: Speaker Volume	☞ pg. 28
Indicator

VOLUME – – – – – –6– – – – – +

7

Warning Indications

Indications			Function
		Displays the battery remaining power.
		Remaining power level: high. It does not necessarily
		mean that the battery pack is fully charged.
		Remaining power level: exhausted
		As the battery power comes close to nil, the battery indicator		blinks (battery
		power warning).
		When the battery power is exhausted, power turns off automatically.
		Blinks when no cassette is loaded, or when the Erase Protection tab is not in the position
		that allows recording.			(☞ pg. 10)
		Blinks for approx. 10 seconds when the power is turned on. This display also blinks when
		the clock (lithium) battery is either not installed or has discharged. Install or replace the
		old battery with a new one.			(☞ pg. 10)
TAPE END		Appears when the tape ends during recording, playback or fast-forward.			(☞ pg. 15)
LENS COVER		Blinks for approx. 5 seconds when the camcorder is turned on with the lens cover closed.
					(☞ pg. 14)
		These 2 warnings appear alternately every 3 seconds if condensation occurs. In this case,
CONDENSATION		all functions except tape eject and power on/off are disabled. Turn the unit off (without
		removing the power supply), wait a few minutes for the warnings to clear, and turn it on
OPERATION PAUSED
		again.
PLEASE WAIT
		These 2 warnings appear alternately every 3 seconds if dirt is detected on the heads
HEAD CLEANING		during recording. In this case, use an optional cleaning cassette. If the warning remains
	REQUIRED	after cleaning, consult your nearest JVC dealer.
USE CLEANING
	CASSETTE
E01— E06		The error indications (E01 — E06) show what type of malfunction has occured. If an
UNIT IN		error indication and warning appear, turn the unit off, remove the power supply (battery,
SAFEGUARD MODE		etc.) and wait a few minutes for them to clear. When it does, you can resume using the
REMOVE AND		camcorder. If the indication remains, consult your nearest JVC dealer.
REATTACH BATTERY