26
MENU
RECORDINGAdvancedFeatures(cont.)
Using Menu For Detailed Adjustment
+
FAR |
|
|
|
| NEAR | |
|
| |||||
|
|
|
|
| – | |
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Gain Up | S . LX | ||||
| Tele Macro | OFF |
| |||
| Interval Timer | OFF | ||||
| Rec Time | OFF | ||||
| JLIP ID NO . | 07 |
| |||
| Tally | ON | ||||
| Set Character |
|
| |||
| Date/Time |
|
| |||
| END :MENU KEY | |||||
|
|
|
|
|
|
|
| Gain Up | NORM | ||||
| Tele Macro | ON |
| |||
| Interval Timer | 1min |
| |||
| Rec Time | 1/2s | ||||
| JLIP ID NO . | 07 |
| |||
| Tally | ON | ||||
| Set Character |
|
| |||
| Date/Time |
|
|
END :MENU KEY
PAUSE
This camcorder is equipped with Program Manager, an
SELECT MODE
1 Turn the PROGRAM AE select dial to any position except AUTO LOCK.
ACCESS MENU SCREEN
2 Press MENU.
SELECT FUNCTION
3 Press + or – to place the highlight bar on the desired function.
MAKE SETTING
4 The setting procedure depends on the function you select.
If you select Gain Up, Tele Macro, Interval Timer, Rec Time, JLIP ID NO or Tally. . . .
.... press FAR or NEAR to cycle through the choices
until the desired setting appears.
If you select Set Character or Date/Time, . . .
.... press NEAR to access the selection menu for
each function (Set Character – ☞ pg. 23; Date/ Time – ☞ pg. 9).
CLOSE MENU
5 Press MENU. The normal screen reappears.
NOTE:
The menu is available only in the Record-Standby mode.
If “Gain Up” or “Tele Macro” in the Menu has been changed from the factory settings, this mark appears in the viewfinder.