JVC HQ VHS instruction manual Dc Out, AA-V11EG

Page 4

EN 5

NOTES:

●The recording time per charge is affected by such factors as the time spent in Record/Standby mode and the frequency of zooming. It is safer to have spare battery packs.

●Charging times noted on page 4 are for fully discharged battey pack, and discharging times are for fully charged battery pack.

●Charging and discharging times vary according to the ambient temperature and the status of the battery pack.

●Remember to set the charge marker after charging a battery pack or after detaching a discharged one from your camcorder.

●Perform the REFRESH function after no less than 5 chargings.

●High temperatures can damage the battery pack, so use only where good ventilation is available. Don’t allow it to discharge in container, such as a bag.

●If you stop recharging or discharging part way through, make sure to remove the battery pack before unplugging the adapter’s AC cord.

●Remove the battery pack from the adapter immediately after discharging.

●To avoid interference with reception, do not use the AC Power Adapter/Charger near a radio.

●Make sure you unplug the DC cord before charging or discharging the battery pack.

●A blinking CHG. indicator means that the battery pack has become hot. Wait until it cools down to continue.

●The CHG. indicator may not light properly with a brand new battery pack, or with one that’s been stored for an extended period. In this case, remove and reattach the battery pack and recharge it. The CHG. indicator should light during recharging. If not, contact your nearest JVC dealer.

To AC outlet

DC OUT

terminal

To DC in jack

 

AC Power

 

Adapter/Charger

DC cord

AA-V11EG

 

 

To car’s

 

cigarette

 

lighter

Car Battery Cord

socket

 

AP-V7E (optional)

 

Car Battery Charger/Adapter

BH-V3E (optional)

USING A CAR BATTERY

Use the optional Car Battery Cord or Car Battery Charger/Adapter (connect as shown in the illustration to the left).

NOTES:

●When using the car battery, leave the engine idling.

●The optional Car Battery Charger (BH-V3E) can also be used to charge the battery pack.

●When using the optional Car Battery Charger or Car Battery Cord (AP-V7E), refer to the respective instruction booklet.

USING AC POWER

Use the AC Power Adapter (connect as shown in the illustration to the left).

NOTE:

The supplied AC Power Adapter/Charger features automatic voltage selection in the AC range from 110 V to 240 V.

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Dear Customer This unit is produced to comply with Standard IEC PublLogical Choice Power Supply PowerAttach Battery Pack Detach Battery PackDC OUT AA-V11EGViewfinder Adjustment Start Clock Operation Close MenuMenu Program AE select dialRecording Mode Setting Tape Length SettingLoading/Unloading a Cassette Shoulder Strap Attachment Grip AdjustmentTripod Mounting Enter RECORD-STANDBY Mode Load a CassetteStart Shooting Stop RecordingPower zoom lever Zoom-in Zoom-out Zoom indicator Feature Purpose OperationPush the switch up toward W ZoomingQuick Review Retake R/F FeatureRetake Video Light GR-AX837/AX637 only SET Video LightLight ON/AUTO/OFF JVC dealer for replacing the video lightDial Viewfinder Mode Viewfinder ModeIndication Restore Initial Setting Exposure ControlBrighten Image Darken ImageFocusing Lock FocusRelease Focus Lock FAR NearPower zoom lever Fader WideInstant Titles Character GeneratorChoose Display Mode Date/Time Character InsertSelect Display SET Program AEAdjust Focus Adjust White BalanceSelect White Balance Select SETUsing Menu For Detailed Adjustment Make SettingSetting procedure depends on the function you select Press MENU. The normal screen reappearsInterval Timer OFF Gain UPNorm OFFRec Time Indicator Interval Timer IndicatorMenu Near FAR Animation Time-LapseCassette Adapter Insert Cassette in AdapterPlay Back on Connected VCR Remove Cassette from AdapterConnect Camcorder to VCR Connect Camcorder to TVPLAY/PAUSE REW FF Stop Power Rewind or Fast-forward the tapePlayback Stop PlaybackCounter R/M PLAY/PAUSE Stop REW FF Feature Power switch To Audio Video OUT connectors Video in connectorsRandom Assemble Editing R.A.Edit SET Remote to Operate VCROperate the VCR Connect toAccess R.A. Edit Counter Display Prepare CamcorderPrepare VCR Register Beginning of SceneEND Automatic Editing Begin Automatic EditingEdited Tape VCR Stop Installing The Battery Pull OUT BatteryHolder RM-V704U or RM-V700UTransmitted beam effective area Remote sensorSTART/STOP Viss INT. Time REC Time RM-V704U or RM-V705U RM-V700UCounter R/M Tape CounterViewfinder START/STOP REW Play Pause InsertREW Play Pause DUB Audio dubbing indicator Viewfinder MikeRM-V704U or RM-V700U or optional Recording cannot be performed Recording does not startTape is running, but there’s no playback picture Noise bars appear in the playback pictureReview or Retake mode Tape won’t ejectShooting a very bright object Image is out of focusSET Button ......................................... pg Tape Length T304560Program AE Select Dial .................. pg Select Button ...................................... pgTally Lamp Power On Indicator Video LightCamera sensor MicrophoneFocus Indicator Set to any position other than Auto Lock# Instant Title Display $ Date/Time Character Display For inserting or replacing the clockStore in a cool, dry place. Extended exposure Do not burnDo not modify or disassemble Use only specified chargers Make sure the cassette bears the VHS-C markClean Exterior Clean LensClean Viewfinder Remove EyepieceAuto/Manual adjustment Output DBs, 1 k-ohm Via Audio out ConnectorDetection, timer Controlled Dimensions X 42 H Weight Approx g
Top Page Image Contents