JVC TK-WD310U instruction manual Rear Panel, Power Power indicator lamp

Page 16

INTRODUCTION

Names and Operations of Parts

[Rear Panel]
	SEE INST-		DC12V
	RUCTION		AC24V	1	2
8	MANUAL
8	CLASS 2 ONLY (U TYPE)
	CLASS 2 ONLY (U TYPE)
	ISOLATED POWER ONLY
			(E TYPE)
9					A
0					A
0	POWER	VIDEO OUT		SET	SELECTOR
	POWER	VIDEO OUT
	LL	INT			B
					B
C

8[DC 12V, AC 24V] Power input terminals To input DC 12V or AC 24V power.

9[VIDEO OUT] Video signal output connector

This BNC connector outputs a composite video signal. Con- nect this to the video input connector of a video monitor, switcher, etc.

0[POWER] Power indicator lamp

This lamp lights when power is supplied to the camera.

10

Image 16

Contents Color Video Camera TK-WD310INSTRUCTIONS Important Safeguards Page III Page For USA and Canada Information for USAPage Features IntroductionEasy Installation Reference page or itemContents CONNECTION/INSTALLATIONMenu Setting IntroductionOperating Precautions Introduction Page Names and Operations of Parts Backfocus adjustment ringFront and Bottom Lens mount Use a screw shorter than 7 mm. Rotation prevention holeThis lamp lights when power is supplied to the camera Power Power indicator lampRear Panel SET button Selector buttonThis is set for internal synchronization INT LL Line LockVIDEO/DC Iris Selector Switch Side PanelIris Iris Terminal This is connected to an automatic iris control lens. Basic System System with up to 8 camerasMounting the lens Ferrite coreDC Iris Video Iris Connections on the back Video signal cable BNCMonitor Power supply DC 12 V or AC 24 MemoMounting the camera Fall Prevention Auto iris lens adjustment ALC adjustment Does not operateLevel adjustment Back focus adjustment With a fixed-focus lens With a zoom lensSET button Selector button Menu settingsOperation C M OD E Menu tree Menu screens are structured as shown belowFocus Adjust screen Default setting OFFAbout menus ModeVideo Adjust screen WDR ModeWDR Custom Settings screen Wide Dynamic Range WDR is adjusted manuallyDisplay the Video Adjust screen. Memo OperationContent AGC Mode Default setting ATW White BalanceManual White Balance screen PreparationCamera Settings screen Lens Adjust screenDefault setting Normal Color LevelPhase Camera TitleCamera Title Edit screen Repeat steps 4. and 5. above to enter up to 24 characters Allowed characters Direction Selector button t directionFactory Settings screen Returns set values to their factory settingsTroubleshooting OthersSpeifications External Dimensions Unit mm TK-WD310 Color Video Camera