JVC LYT1515-001A manual EN Video Playback, Blank Search, Playback Snapshot, Press Snapshot

Page 20
MENU
7
1 Load a cassette. ( pg. 16)
2 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.
3 To start playback, press 6.
4 To stop playback, press 7.
During Stop mode, press 1 to rewind, or ¡ to fast-forward the tape.
To control the speaker volume
Slide the Power Zoom Lever (VOL. +/–) towards “+” to turn up the volume, or towards “–”to turn down the volume.
NOTES:
The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV.
( pg. 21)
If Stop mode continues for 5 minutes when power is supplied from a battery, the camcorder shuts off automatically. To turn on again, set the Power Switch to “OFF”, then to “PLAY”.
When a cable is connected to the AV connector, the sound is not heard from the speaker.
Still Playback
Pauses during video playback.
1) Press 6 during playback.
2) To resume normal playback, press 6 again. If still playback continues for more than about
3 minutes, the camcorder’s Stop mode is automatically engaged.
Shuttle Search
Allows high-speed search in either direction during video playback.
1) During playback, press ¡ for forward search, or 1 for reverse search.
2) To resume normal playback, press 6.

20 EN VIDEO PLAYBACK

Normal Playback

 

¡

VOL. +/–

6

Lock Button

1

 

Speaker

 

During playback, press and hold ¡ or 1. The search continues as long as you hold the button. Once you release the button, normal playback resumes.

A slight mosaic effect appears on the display during Shuttle Search. This is not a malfunction.

ATTENTION:

During Shuttle Search, parts of the picture may not be clearly visible, particularly on the left side of the screen.

Blank Search

Helps you find where you should start recording in the middle of a tape to avoid time code interruption. ( pg. 19)

1 Load a cassette. ( pg. 16)

2 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.

3 Press BLANK.

The “BLANK SEARCH” indication appears and the camcorder automatically starts reverse or forward search, then stops at the spot which is about 3 seconds of tape before the beginning of the detected blank portion.

To cancel Blank Search, press 7 or BLANK.

NOTES:

Before starting Blank Search, if the current position is at a blank portion, the camcorder searches in the reverse direction. If the current position is at a recorded portion, the camcorder searches in the forward direction.

If the beginning or end of the tape is reached during Blank Search, the camcorder stops automatically.

A blank portion which is shorter than 5 seconds of tape may not be detected.

The detected blank portion may be located between recorded scenes. Before you start recording, make sure there is no recorded scene after the blank portion.

Playback Snapshot

This camcorder allows you to take snapshots during video playback.

Press SNAPSHOT.

Image 20
Contents GR-D350U Dear CustomerRead This First Safety Precautions Important Safety Instructions Data Battery Wipe/Fader EffectsBacklight Compensation Auto ButtonEN Contents Getting Started Advanced Features Index Getting Started ENConnectors ÄIndicatorsControls ÃOther PartsGetting LCD Monitor/Viewfinder Indications During Video RecordingDuring Video Playback Provided Accessories Before Using This CamcorderPower How To Attach The Lens CapHow To Attach The Shoulder Strap Charging The Battery PackData Battery System Maximum continuous recording timeOperation Mode Using AC PowerAuto/Manual Mode About BatteriesDate/Time Settings Language SettingsInformation SET orViewfinder Adjustment Brightness Adjustment Of The DisplayDiopter Adjustment Control Tripod MountingTo protect valuable recordings Camcorder needs to be powered up to loadOr eject a cassette Basic Recording Video Recording ENTape Remaining Time Remove the lens cap.  pg Open the LCD monitor fullyWhile using the LCD monitor While using the viewfinderEN Video Recording ZoomJournalistic Shooting Time CodeQuick Review Display Minutes Seconds Frames Frames = 1 secondEN Video Playback Blank SearchPlayback Snapshot Press SnapshotIf using a VCR , go to step Video Playback ENVideo Playback Menus EN Menus for Detailed AdjustmentVideo Recording Menus Recording Menus English / Français Español / Português Playback Menus StereoSound L Sound RWide Mode Motor Drive ModeNight-Alive Snapshot Record Still Image On TapeTo reset to Auto Focus Manual FocusExposure Control Manual focus is recommended in situations listed belowEN Features for Recording Iris LockTo return to automatic iris control To lock the exposure control and the irisWhite Balance Adjustment To cancel Spot Exposure ControlTo change the setting Spot Exposure ControlSelect OFF in . The effect indicator disappears To RECSet WIPE/FADER in Function Menu.  pg To deactivate the selected effectProgram AE, Effects And Shutter Features for Recording ENEffects Dubbing To a VCR EN Editing1Yellow to Video 2Red to Audio R 3White to Audio L Audio/Video cable ProvidedEquipped With a DV Connector Digital DubbingTo a PC with a DV connector by using If you are using a Windows XP, you can useConferences over the Internet, using a It is also possible to transfer still/moving imagesPower Advanced featuresVideo Recording Video PlaybackEN Troubleshooting Other problemsButton is pressed while the Power Switch is set ÷Appears when the date/time is not set÷The built-in clock battery has run out ReplacementCleaning The Camcorder EN User MaintenanceBattery Packs Using Household AC Plug AdapterAC Adapter CassettesEN Cautions LCD MonitorMain Unit NotAbout moisture condensation Declaration of Conformity Serious malfunctioningEN Specifications Camcorder35-37 Terms ENRecording Capacity GR-D350U

1105ASR-NF-VM, LYT1515-001A specifications

The JVC LYT1515-001A and 1105ASR-NF-VM are innovative components that showcase the fusion of advanced engineering and cutting-edge technology, making them suitable for various applications in modern multimedia environments.

The JVC LYT1515-001A is a versatile LCD display panel known for its exceptional performance and reliability. One of its standout features is its high-definition resolution, which delivers vibrant colors and sharp images, making it ideal for video presentations, digital signage, and interactive displays. The panel's brightness and contrast levels are optimized for visibility in various lighting conditions, ensuring that content is easily viewable, whether in bright daylight or dimly lit environments.

Moreover, this display panel employs advanced backlighting technology that enhances energy efficiency while maintaining performance. The low power consumption reduces operational costs and makes it an eco-friendly option for businesses looking to minimize their carbon footprint. Additionally, the LYT1515-001A incorporates a wide viewing angle, allowing for better visibility from different perspectives without compromising image quality.

Moving on to the 1105ASR-NF-VM, this component serves as a powerful signal processor designed for seamless integration with audio and video systems. One of its main features is its ability to support a variety of input formats, making it highly adaptable to different technological setups. The processor is equipped with advanced audio processing algorithms that enhance sound quality, creating a richer auditory experience for the user.

The 1105ASR-NF-VM also boasts robust connectivity options, including HDMI, USB, and analog inputs, which facilitate easy integration with a wide range of devices, from computers to projectors. Its low-latency performance ensures real-time audio and video processing, essential for live events and presentations where timing is critical.

In conclusion, both the JVC LYT1515-001A and 1105ASR-NF-VM epitomize the integration of technology and user-friendly features. With their high-quality performance, energy efficiency, and versatile connectivity options, these components provide valuable solutions for the evolving needs of audio-visual applications, making them a reliable choice for professionals across various industries.