Inserting and removing the card (optional)/the battery
Set the camera ON/OFF switch to OFF and slide the release lever () to [OPEN] before opening the lid
[OPEN] [LOCK]
Insert the battery and card, making sure that their orientation is correct
••Battery: Insert all the way firmly until a locking sound is heard, and check that the lever is hooked over the battery.
••Card: Insert all the way firmly until it clicks.
Close lid
Slide to the [LOCK] position.
■■To remove
••To remove battery: | ••To remove card: |
move lever in direction of arrow. | press down in center. |
Lever |
●●Always use genuine Panasonic batteries
●●If you use other batteries, we cannot guarantee the quality of this product.
●●Insert the card fully, otherwise it may be damaged.
12 VQT3H25 (ENG)