Panasonic BB-HNP60 operating instructions Changing Motion Detection Settings

Page 53

Operating Instructions

2.4.5 Changing Motion Detection Settings

Motion Detection Settings has two types; default setting and current camera setting.

1.Click Camera Preview in the Camera List to select Network Camera.

•The frame of the selected Camera Preview turns blue.

2.Select [Tools] [Default Motion Detection Settings...] on the menu bar.

•Motion Detection Settings window is also accessible by clicking Motion Detection Meter.

(a)

(b)

(c)

(d)

(e)

3.Drag the slider to adjust and click [OK].

(a)[Default Setting] is effective to all configured Network Cameras. [Current Camera] is effective only to the current displayed Network Camera. [Default Setting] does not have effect on Network Cameras that have settings on [Current Camera].

(b)Set the cell size*. Smaller the cell size is, easier the tiny motion is to be detected.

(c)Set the percentage of cells to start recording. This setting determines the percentage of the red meter and the green meter of the Motion Detection Meter.

(d)Set the level of the sensitiveness to detect the motion.

(e)[Restore Factory Defaults] on [Default Setting] window resets the settings to the factory default. [Restore Default] on [Current Camera] window sets the settings to those on [Default Setting].

*Percentage of the divided cells activates the Motion Detection Recording.

53

Image 53

Contents Operating Instructions End-User License Agreement Term RestrictionsLimitation of Liabirity Description System RequirementsOperating System TrademarksTable of Contents Index Practical OperationSection Main Features Automatic Backup Setting Hard Disk Capacity for RecordingRead the End-User License Agreement. Network Camera Recorder InstallationLooking at Installation Procedure CD-ROM Checking Included AccessoriesClick Install Network Camera Recorder Installing Network Camera RecorderOperating Instructions Operating Instructions Click Finish Uninstalling Network Camera RecorderHow to Start and Close Network Camera Recorder Click Browse to Registration User RegistrationSelect Help Enter Registration Code Creating a new folder Folder Selection to Save the ImageOperating Instructions Select your destination drive and folder, and click OK Selecting an existing folderNetwork Camera Recorder Screen Window Size buttons Recording buttons Operation Bar Using ImageNetwork Camera Recorder Screen When staying stopped When monitoringWhen displaying Jpeg file When displaying MJP fileSearch searches for your recorded images. Window Size buttons Playback buttons Using Thumbnails Filenames Time Using Search ResultsCamera Preview Using Camera ListCamera Name LampSelect File Camera Preview Size... on the menu bar Changing Camera Preview SizeConfiguring a New Network Camera Network Camera ConfigurationInstructions for the data fields Recording Select Off, On or Motion Detect TimerCamera Type IP addressInstructions for the data fields Use AuthenticationRecording CapacityEdit Edit Current Camera on the menu bar Editing the Network CameraSelect File Default Camera Settings on the menu bar Changing Default Camera SettingsSetting the Proxy Server Select Delete Current Camera or Delete Selected Cameras Deleting a Configured Network CameraOperating Instructions Preset buttons*1 Zoom buttons*1*2 Focus buttons*1*2 Using the Operation Bar640 x 480, 320 x 240 default, 160 x Network Camera MonitoringUsing Preset Buttons Automatic and Manual Focusing Zooming and FocusingControl Stop All Cameras on the menu bar Monitoring the Network CameraStart All Cameras on the menu bar Setting Network Camera on the Camera Bar Click CamBar Using Camera BarDeleting all Network Cameras Commands for all Network Cameras Network Camera Recording Setting the Hard Disk CapacityBacking up the Recorded Image Recording the Network Camera Resolution Disk space File size per imageResolution File size Motion Detection Recording Changing Motion Detection Settings Click Edit Cam You can also select Edit Edit Current Camera Timer RecordingSelect Control Automatic Timer Operation Click Thumbnails tab Refresh Load thumbs When selecting an MJP filePlaying Back the Recorded Image When selecting a Jpeg file Searching for Recorded Image Extracting Jpeg Files from an MJP File Controlling Playback Speed Deleting selected images Deleting the Recorded ImageClick Thumbnails tab Select File Delete Selected Images on the menu barSelect File Delete All Images for Selected Cameras Deleting all recorded imagesPractical Operation Select Print Printer Setup on the menu bar Print SetupPrinting the Recorded Image Set Printer, Paper Size and Orientation. Click OKSelect Print Print Status Printing Cancel Printing on the menu barSelect Print Print Current Image or Print Selected Images Click Send to PrinterSelect Control Start Selected Cameras on the menu bar Multi-Camera RecordingCopying or Moving the Recorded Image Operating Instructions Enabling or Disabling the Network Camera Creating AVI Motion Video Files Specify Save in and File name and click Save Select File Save Current Image Renaming and Saving the ImageSelect File Copy Image to Clipboard Copying to the ClipboardSelect Help About Confirming the Version InformationDefault Setting and Troubleshooting Default Setting List Setup Server Proxy address Timer OperationEdit Current Recording FileResults Installation BackupSetup Rows SystemProblem Cause and Remedy TroubleshootingUser Name ID and Password Proxy Setup on the menuAutomatic Timer Operation is not checked Timer Operation is not setAutomatic Timer Operation in the Edit on Menu bar. Check Automatic Timer OperationSelect Panasonic HCM series with Zoom on File Index Jpeg Copyright

Related manuals

Manual 86 pages 11.77 Kb