Sharp XL-MP130 operation manual Timer and sleep operation, Timer playback or timer recording

Timer and sleep operation

XL-MP110E

Timer playback:

The unit turns on and plays the desired source (CD, tuner, tape) at a preset time.

Timer recording:

The unit turns on and starts recording from the tuner at the preset time.

This unit has 2 types of timer: ONCE TIMER and DAILY TIMER.

Once timer: Once timer play or once timer recording works for one time only at a preset time.

For example, if you are away but want to record a programme on a radio station.

Daily timer: Daily timer play or daily timer recording works at

the same preset time every day.

For example, set the timer as a wake-up call every morning.

Using the once timer and daily timer in combination:

For example, use the once timer to record a radio programme, and use the daily timer to wake up.

1Set the daily timer (pages 27 - 29).

2Set the once timer (pages 27 - 29).

	1 minute or more
	Daily timer		Once timer
Start	Stop	Start	Stop

Note:

When set times for the daily timer and once timer overlap, the once timer takes priority. Allow an interval of at least 1 minute between op- erations.

/

Timer playback or timer recording

Before setting timer:

1Check that the clock is set to the correct time (refer to page 13). If it is not set, you cannot use the timer function.

2For timer playback: Load a cassette or discs to be played.

For timer recording: Load a cassette for recording in the cas-

sette compartment.

1Press the ON/STAND-BY button to turn the power on.

2Press the CLOCK/TIMER button.

3Within 10 seconds, press the or button to se- lect "ONCE" or "DAILY", and press the MEMORY/SET but- ton.

Set the clock to the correct time if "ONCE" or "DAILY" does not appear.

Continued to the next page

Advanced Features

27