Panasonic DMCFZ47K, DMC-FZ47, VQT3R48 owner manual 3D Playback

Basic

[3D PLAYBACK]

Setup the output method for 3D pictures.

[ ]: Set when connecting to a 3D compatible television.

[ ]: Set when connecting to a television not compatible with 3D.

Set this when you would like to view pictures in 2D (conventional image) on a 3D compatible television.

•This will work when the HDMI mini cable (optional) is connected.

•Refer to P150 for the method to playback 3D pictures in 3D.

}[SCENE MENU]

Set the screen that is displayed when the mode dial is set to [], [ ], [], [ ], [ ] and [ ].

[OFF]: The recording screen in the currently selected Advanced Scene Mode or Scene Mode appears.

[AUTO]: The Advanced Scene Mode or Scene Mode menu screen appears.

[MENU RESUME]

The last operated menu position is saved even if the camera is turned off.

[OFF]/[ON]

[VERSION DISP.] It is possible to check which version of firmware is on the camera.

[FORMAT]	The built-in memory or card is formatted. Formatting irretrievably
	deletes all the data so check the data carefully before formatting.

•Use a battery with sufficient battery power or the AC adaptor (optional) when formatting. Do not turn the camera off during formatting.

•If a card has been inserted, only the card is formatted. To format the built-in memory, remove the card.

•If the card has been formatted on a PC or other equipment, format it on the camera again.

•It may take longer to format the built-in memory than the card.

•If the card cannot be formatted, please try another card before contacting your nearest Service Center.

For USA and Puerto Rico assistance, please call:

1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo

For Canadian assistance, please call:

1-800-99-LUMIX (1-800-995-8649) or

send e-mail to: lumixconcierge@ca.panasonic.com

- 58 -