Panasonic DMC-FZ40 operating instructions Connect the AC cable, About the Charge indicator

Page 12

Connect the AC cable.

• Disconnect the charger from the electrical socket and detach the battery after charging is completed.

∫About the [CHARGE] indicator

The [CHARGE]

indicator turns on: The [CHARGE] indicator A is turned on and charging will start.

The [CHARGE]

indicator turns off: The [CHARGE] indicator A of the charger will turn off once the charging has completed without any problem.

•When the [CHARGE] indicator flashes

–The battery temperature is too high or too low. It is recommended to charge the battery again in an ambient temperature of between 10 oC to 30 oC.

–The terminals of the charger or the battery are dirty. In this case, wipe them with a dry cloth.

12 VQT2X30 (ENG)

Image 12

Contents Basic Operating Instructions Information for Your Safety Dear CustomerCarefully observe copyright laws Product Identification MarkingAbout the battery pack About the battery chargerHow to replace the Fuse Figure aENG VQT2X30 Contents Standard Accessories Indicated as battery charger or charger in the textNames of the Components AF/AF#/MF buttonPress 10 VQT2X30 ENG Charging the Battery Battery that can be used with this unit is DMW-BMB9EAbout batteries that you can use with this unit ChargingAbout the Charge indicator When the Charge indicator flashesConnect the AC cable ChargePlayback When using the LCD monitor/Viewfinder Recording conditions by Cipa standardApprox min About the Built-in Memory/the Card Built-in MemoryCard Inserting and Removing the Card optional/the Battery Setting Date/Time Clock Set Clock is not set when the camera is shippedSelect Clock SET in the REC or Setup menu, and press Turn the camera onSetting the Menu Selecting the REC Mode Switching the mode by rotating the mode dialAlign a desired mode with part a BasicAdvanced Scene Mode AdvancedTaking pictures using the automatic function Intelligent Auto ModeScene Detection Press FocusTaking pictures with your favourite settings Programme AE ModeProgramme shift Example of programme shiftCompensating the Exposure Press MENU/SET to finishPress the shutter button halfway to finish Taking pictures by specifying the aperture/ shutter speed Aperture-Priority AETaking picture by setting the exposure manually Set the mode dial to ²Rotate the rear dial to set the aperture and shutter speed Press the shutter button halfwaySelect the mode Recording Motion PictureStart recording by pressing the motion picture button Playing back Pictures Normal Play Press Press 2/1 to select the pictureOnce deleted, pictures cannot be recovered Deleting PicturesFor Windows For Macintosh Specifications LensBurst recording Burst speed Number Recordable PicturesHi-speed burst Burst speed NumberLCD monitor ViewfinderFlash MicrophoneDMW-BMB9E Voltage/capacity V/895 mAhPanasonic Corporation

Related manuals

Manual 44 pages 59.56 Kb