Panasonic DMC-FX150, DMC-FX180 operating instructions Press 3/4 to select PC, and then press Menu

Page 26

2	Press 3/4 to select [PC], and then press [MENU/
	SET].
	SET].

•If [USB MODE] is set to [PC] in the [SETUP] menu in advance, the camera will be automatically connected to the PC without displaying the [USB MODE] selection screen. Since there is no need to set this each time you connect to the PC, it is convenient.

•When the camera has been connected to the PC with

[USB MODE] set to [PictBridge(PTP)], a message may appear on the PC’s screen. Select [Cancel] to close the screen, and disconnect the camera from the PC. Then set [USB MODE] to [PC] again.

USB MODE

PLEASE SELECT

THE USB MODE

PictBridge(PTP)

PC

SELECT

SET MENU

3 Double-click on [Removable Disk] in [My Computer].

•When using a Macintosh, the drive is displayed on the desktop. (“LUMIX”, “NO_NAME” or “Untitled” is displayed.)

4

5

Double-click [DCIM] folder.

Using a drag-and-drop operation, move the pictures you want to acquire or the folder storing those pictures to any different folder on the PC.

∫Disconnecting the USB connection cable safely

•Proceed with the hardware removal using “Safely Remove Hardware” on the task tray of the PC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD monitor of the digital camera before removing the hardware.

26 VQT1T03 (ENG)

Image 26

Contents Model No. DMC-FX150/DMC-FX180 Carefully observe copyright laws Information for Your SafetyDear Customer How to replace the Fuse About the battery chargerCare of the camera About the battery packAbout Condensation When the lens is fogged up About cards that can be used in this unit Http//panasonic.co.jp/pavc/global/csContents Standard Accessories Battery Carrying CaseNames of the Components Press11 12 Battery Charging the BatteryAttach the battery with Connect the AC cableBattery life Recording conditions by Cipa standardBattery Insert it fully being careful about Inserting and Removing the Card optional/the BatteryArrow and open the card/battery door Slide the release lever in the directionSelect Clock SET in the REC or Setup menu, and press Setting Date/Time Clock SetChanging the clock setting Turn the camera onSetting the Menu Mode playback mode menuSetting menu items Using the quick menu Dial Selecting the REC ModeSwitching the mode by rotating the mode Press the shutter button fully push it Taking pictures using the automatic functionPress the shutter button halfway to focus Further, and take the pictureFace detection Scene detectionAF Tracking Function Backlight CompensationPress the halfway pressed shutter button Taking pictures with your favourite settingsFocusing Fully to take a pictureRotate the zoom lever towards Wide Taking Pictures with the ZoomRotate the zoom lever towards Tele Switching to the appropriate flash setting Taking Pictures using the Built-in FlashTaking Pictures with the Self-timer Press 2/1 to select the picture Switch a toPlaying back Pictures Normal Play To delete multiple pictures up to 50 or all the pictures Deleting PicturesTo delete a single picture Supplied Connecting to a PCConnect the camera to a PC via the USB connection cable a Double-click on Removable Disk in My Computer Disconnecting the USB connection cable safelyPress 3/4 to select PC, and then press Menu Icon on the desktop Double click the FX150FX180Operating Instructions shortcut For WindowsSpecifications White balance Metering modeShutter speed Exposure AEInformation for your safety Voltage DimensionsBattery Pack lithium-ion Panasonic CGA-S005E MassENG VQT1T03 Web Site http//panasonic.net