Panasonic DMC-SZ02/B, DMC-SZ1, DMC-FH8, F1211WT0, VQT3Z52 owner manual Message Display, 117

Others

Message Display

Confirmation messages or error messages will be displayed on the screen in some cases. The major messages are described below as examples.

[This picture is protected]

>Delete the picture after canceling the protect setting. (P95)

[Some pictures cannot be deleted]/[This picture cannot be deleted]

•Pictures not based on the DCF standard cannot be deleted.

>Format the card after saving necessary data on a PC etc. (P44)

[Cannot be set on this picture]

•[Text Stamp] or [Print Set] cannot be set for pictures not based on the DCF standard.

[Built-in memory full]/[Memory card full]/[Not enough space on built-in memory]/ [Not enough memory on the card]

•There is no space left on the built-in memory or the card.

•When you copy pictures from the built-in memory to the card (batch copy), the pictures are copied until the capacity of the card becomes full.

[Some pictures cannot be copied]/[Copy could not be completed]

•The following pictures cannot be copied.

–When a picture with the same name as the picture to be copied exists in the copy destination. (Only when copying from a card to the built-in memory.)

–Files not based on the DCF standard.

•Moreover, pictures recorded or edited by other equipment may not be copied.

[Built-In Memory Error]/[Format built-in memory?]

•This message will be displayed when you format the built-in memory on a PC.

>Format the built-in memory on the camera again. (P44) The data on the built-in memory will be deleted.

[Memory card error.

This card cannot be used in this camera. Format this card?]

•It is a format that cannot be used with this unit.

>Insert a different card and try again.

>Reformat on this unit (P44) after saving necessary data using a PC, etc. Data will be deleted.

- 117 -