Panasonic DMC-FP3 operating instructions Print SET, Touch Single or Multi Select picture

For details about the setting procedure in the [PLAYBACK] menu (→15)

[PRINT SET]

Picture/picture no./date printing settings can be made for when printing with DPOF print- compatible shops or printers. (Ask at shop to check compatibility)

For more information visit: http://panasonic.jp/dc/dpof_110/white_e.htm

Set-up: Press [MENU]→ [PLAYBACK] menu → Touch [PRINT SET]

Touch [SINGLE] or [MULTI]

Select picture	●[MULTI]
●[SINGLE]
	• Touch [SET]

Set number of pictures by touching ▲▼, and then touch [SET]

(repeat steps	and	when using [MULTI] (up to 999 pictures))
●[SINGLE]		No. to print	●[MULTI]
			No. to print
		Date print set	Date print set

•Date print setting/release → Touch [DATE]

•After confirmation, touch [EXIT] to return to the menu screen.

■To clear all

In step , touch [CANCEL] → Touch [YES]

●When using PictBridge-compatible printers, check settings on actual printer as these may take priority over camera settings.

●To print from built-in memory at a shop, first copy pictures to card (→77) before making settings. ●DPOF print settings may not be made to non-DCF (→32) files.

●Some DPOF information set by other equipment cannot be used. In such cases, delete all of the DPOF information and then set it again with this camera.

●Date printing settings cannot be made for pictures with a [TEXT STAMP] applied. These settings will also be canceled if a [TEXT STAMP] is applied later.

VQT2P49 75