Panasonic DMC-FX38 Off, 1SEC 2SEC, Reset the file number of the next recording to, PictBridgePTP

Preparation

o[AUTO REVIEW]

Set the length of time that the picture is displayed after taking it.

[OFF]

[1SEC.]

[2SEC.]

[HOLD]: The pictures are displayed until one any of the buttons is pressed.

[ZOOM]: The picture is displayed for 1 second and then enlarged 4k and displayed for 1 more second.

•The auto review function is activated regardless of its setting when using auto bracket (P43), [HI-SPEED BURST] (P49) and [FLASH BURST] (P49) in scene mode, burst mode (P64) and when recording still pictures with audio (P66). (The pictures cannot be enlarged.)

•In Intelligent auto mode, the auto review function is fixed to [2SEC.].

v[NO.RESET]

Reset the file number of the next recording to 0001.

•The folder number is updated and the file number starts from 0001. (P91)

•A folder number between 100 and 999 can be assigned.

When the folder number reaches 999, the number cannot be reset. We recommend formatting the card (P23) after saving the data on a PC or elsewhere.

•To reset the folder number to 100, format the built-in memory or the card first and then use this function to reset the file number.

A reset screen for the folder number will then appear. Select [YES] to reset the folder number.

w[RESET]

The [REC] or [SETUP] menu settings are reset to the initial settings.

•When the [RESET] setting is selected during recording, the operation that resets the lens is also performed at the same time. You will hear the sound of the lens operating but this is normal and not indicative of malfunctioning.

•When [SETUP] menu settings are reset, the following settings are also reset. In addition, [ROTATE DISP.] (P83) is set to [ON], and [FAVORITE] (P84) is set to [OFF] in [PLAYBACK] mode menu.

–The birthday and name settings for [BABY1]/[BABY2] (P47) and [PET] (P48) in scene mode.

–The settings of [TRAVEL DATE] (P55) (departure date, return date, location)

–The [WORLD TIME] (P56) setting.

•The folder number and the clock setting are not changed.

x[USB MODE]

Select the USB communication system after or before connecting the camera to your PC or your printer with the USB connection cable (supplied).

y[SELECT ON CONNECTION]:

Select either [PC] or [PictBridge(PTP)] if you connected the camera to a PC or a printer supporting PictBridge.

{[PictBridge(PTP)]:

Set after or before connecting to a printer supporting PictBridge.

z[PC]:

Set after or before connecting to a PC.

•When [PC] is selected, the camera is connected via the “USB Mass Storage” communication system.

•When [PictBridge(PTP)] is selected, the camera is connected via the “PTP (Picture Transfer Protocol)” communication system.

22 VQT1S07