Inserting and Removing the Card (optional)/the Battery
•Turn the power switch to [OFF] and confirm that the lens barrel is retracted.
•Close the flash.
•We recommend using a Panasonic card.
Slide the release lever in the direction of the arrow and open the card/battery door.
•Always use genuine Panasonic batteries
•If you use other batteries, we cannot guarantee the quality of this product.
OPEN LOCK
Battery: Insert until it is locked by the lever A being careful about the direction you insert it. Pull the lever A in the direction of the arrow to remove the battery.
Card: Push it fully until it clicks being careful about the direction you insert it. To remove the card, push the card until it clicks, then pull the card out upright.
B: Do not touch the connection terminals of
the card.
•The card may be damaged if it is not fully inserted.
1:Close the card/battery door.
2:Slide the release lever in the direction of the arrow.
B
OPEN LOCK
16 VQT2X16 (ENG)