Resetting the File Number
REC 
SETUP
MONITOR 
AUTO REVIEW 
BEEP
POWER SAVE 2 MIN.
NO. RESET
CLOCK SET
SELECT:
SET
EXIT
NUMBER RESET
RESET FILE NO.
IN THE CAMERA?
NO |
YES |
SELECT:
EXIT: 
As the file numbers are recorded sequentially by the camera, when you use some cards (SD Memory Card/MultiMediaCard), it may happen that the file numbers on your cards are not in order. Use this function when you insert a new card and you want to start recording from the file number 0001, or when you want to set the file numbers of the recorded cards in consecutive numbers.
[Preparation]
Set the operational mode dial to REC mode
(single mode [
] or burst mode [ 
]).
1Press the [MENU] button.
2Press 1 to open the setup menu.
3Press 3/4 to select [NO. RESET] and then press 1.
4When this message is displayed
“RESET FILE NO. IN THE CAMERA?”, press 3/4 to select [YES].
5Press the [REVIEW/SET] button to set.
6Press the [MENU] button.
•The menu will disappear.
81