Panasonic DMC-ZS5, DMC-TZ8, DMC-TZ10 Message displays, No Additional Selections can be Made

Message displays

[THIS MEMORY CARD CANNOT BE USED]

●A MultiMediaCard was inserted.

→ Not compatible with the camera. Use a compatible card.

[THIS MEMORY CARD IS WRITE-PROTECTED]

●Unlock the write-protect switch on the card. (→16)

[NO VALID PICTURE TO PLAY]

●Take pictures, or insert a different card already containing pictures.

[THIS PICTURE IS PROTECTED]

●Release the protection before deleting, etc. (→135)

[SOME PICTURES CANNOT BE DELETED] [THIS PICTURE CANNOT BE DELETED]

●Non-DCF pictures (→44) cannot be deleted.

→Save needed data on a computer or other device, and then use [FORMAT] on the camera to erase the card. (→28)

[NO ADDITIONAL SELECTIONS CAN BE MADE]

●The number of pictures that can be deleted at once has been exceeded.

●More than 999 pictures have been set as favourites. (Other than AVCHD Lite motion pictures )

●The number of pictures allowing [TITLE EDIT], [TEXT STAMP] or [RESIZE] (multiple settings) at once has been exceeded.

[CANNOT BE SET ON THIS PICTURE]

●[PRINT SET], [TITLE EDIT], or [TEXT STAMP] cannot be made for non-DCF pictures (→44).

[PLEASE TURN CAMERA OFF AND THEN ON AGAIN] [SYSTEM ERROR]

●The lens is not working correctly.

→Turn on power again.

(Consult the dealer or your nearest Service Centre if display still remains)

[SOME PICTURES CANNOT BE COPIED] [COPY COULD NOT BE COMPLETED]

●Pictures cannot be copied in following cases.

→Picture of same name already exists in built-in memory when copying from card.

→File is not of DCF standard.

→Picture taken or edited on a different device.

[NOT ENOUGH SPACE ON BUILT-IN MEMORY] [NOT ENOUGH MEMORY ON THE CARD]

●There is no space left on the built-in memory or the card. When you copy pictures from the built-in memory to the card (batch copy), the pictures are copied until the capacity of the card becomes full.

[BUILT-IN MEMORY ERROR] [FORMAT BUILT-IN MEMORY?]

●Displayed when formatting built-in memory via computer, etc. → Reformat directly using camera. Data will be deleted.

[MEMORY CARD ERROR] [FORMAT THIS CARD?]

●The card format cannot be used with this camera.

→ Save needed data on a computer or other device, and then use [FORMAT] on the camera. (→28)

[INSERT SD CARD AGAIN] [TRY ANOTHER CARD]

●Access to card has failed. → Insert card again.

●Try with a different card.

154 VQT2R48