Panasonic DMC-TZ3 operating instructions Specifications, Image sensor

Others			6 Specifications
	Digital Camera: Information for your safety
	Power Source			DC 5.1 V
		Power Consumption		When recording: 1.7 W (DMC-TZ3)/1.4 W (DMC-TZ2)
				When playing back: 0.8 W
	Camera effective pixels			DMC-TZ3: 7,200,000 pixels DMC-TZ2: 6,000,000 pixels
	Image sensor			DMC-TZ3: 1/2.35” CCD, total pixel number 8,500,000 pixels
				DMC-TZ2: 1/2.33” CCD, total pixel number 7,390,000 pixels
				Primary color filter
	Lens			Optical 10 x zoom
				f=4.6 mm to 46 mm (35 mm film camera equivalent: 28 mm to 280 mm)/F3.3 to F4.9
	Digital zoom			Max.4 x
	Extended optical zoom			Max. 15 x (DMC-TZ3)/Max. 13.8 x (DMC-TZ2)
	Focus			Normal/Macro
				9-area-focusing/3-area-focusing (High speed)/
				1-area-focusing (High speed)/1-area-focusing/Spot-focusing
	Focus range
		Normal		50 cm (1.64 feet) (Wide)/2 m (6.56 feet) (Tele) to
		Macro/Simple/Motion picture/		5 cm (0.16 feet) (Wide)/1 m (3.28 feet) (Tele) to
		Intelligent ISO/Clipboard		(2 m (6.56 feet) unless max.T)
		Scene mode		There may be difference in above settings.
	Shutter system			Electronic shutter + Mechanical shutter
	Motion picture recording			848 × 480 pixels*/640 × 480 pixels* /320 × 240 pixels
				(*Only when using an SD Memory Card)
				(30 or 10 frames/second with audio. The maximum recording time depends
				on the capacity of the built-in memory or the card.)
	Burst recording
		Burst speed		DMC-TZ3:
				3 frames/second (High speed), 2 frames/second (Low speed),
				Approx. 2 frames/second (Unlimited)
				DMC-TZ2:
				Approx. 2 frames/second (Unlimited)
		Number of recordable		DMC-TZ3:
		pictures		Max. 7 frames (Standard), max. 5 frames (Fine),
				Depends on the remaining capacity of the built-in memory or the card (Unlimited).
				DMC-TZ2:
				Depends on the remaining capacity of the built-in memory or the card.
	ISO sensitivity			AUTO/100/200/400/800/1250
				[HIGH SENS.] mode: 3200
	Shutter speed			8 to 1/2000th
				[STARRY SKY] mode: 15 seconds, 30 seconds, 60 seconds
				Motion picture mode: 1/30th to 1/20000th
	White balance			AUTO/Daylight/Cloudy/Shade/Halogen/White set
	Exposure (AE)			AUTO (Program AE)
				Exposure compensation (1/3 EV Step, -2 EV to +2 EV)
	Metering mode			Multiple/Center weighted/Spot
	LCD monitor			DMC-TZ3:
				3.0” low-temperature polycrystalline TFT LCD (Approx. 230,000 pixels)
				(field of view ratio about 100 %)
				DMC-TZ2:
				2.5” low-temperature polycrystalline TFT LCD (Approx. 207,000 pixels)
				(field of view ratio about 100 %)
	Flash			Flash range: (ISO AUTO) Approx.60 cm (1.97 feet) to 4.2 m (13.8 feet) (Wide)
				AUTO, AUTO/Red-eye reduction, Forced flash ON (Forced flash ON/
				Red-eye reduction), Slow sync./Red-eye reduction, Forced OFF

94 VQT1B61