Inserting and removing the card (optional)/the battery
Set the camera ON/OFF switch to OFF and slide the release lever ( A ) to [OPEN] before opening the lid
A
Completely insert battery and card
••Battery: Push in until the lever is locked.
••Memory card: Push in until it clicks.
BDo not touch terminal. C Check orientation.
Close lid
Slide to the [LOCK] position.
[OPEN] [LOCK]
B
C
■■To remove
••To remove battery: | ••To remove card: |
move lever in direction of arrow. | press down in center. |
Lever
●●Always use genuine Panasonic batteries
●●If you use other batteries, we cannot guarantee the quality of this
product.
●●The card may be damaged if it is not fully inserted.
12 VQT2L60 (ENG)