Touch operations
This camera’s touch screen senses pressure that is applied to the screen.
Touch
To “touch” is to press the touch screen and then pull the finger back again.
Touching is used to select icons or pictures, among other actions.
••Touch an icon near its center. If multiple icons are touched simultaneously, the camera may not operate normally.
Drag
To “drag” is to touch and slide your finger across the touch screen surface.
Dragging (sliding your finger across the screen) is used to scroll the pictures or change the range of the pictures displayed.
●●If the type of sheet made to protect LCD screens that are available in the market is to be used, observe the precautions that are contained with the sheet. (Some types of protective sheets may impair the screen’s appearance and ease of operation.)
●●If the camera is used with a protective sheet available on the market attached to its screen or if the screen is not very responsive, touch the screen with a little more pressure.
●●If your hand is pressed against the touch screen when holding the camera, the touch screen will not work properly.
●●Do not press on the LCD monitor with hard pointed tips, such as ball point pens.
●●Do not press the touch screen with your fingernails.
●●Clean the LCD monitor with a soft, dry cloth if there are fingerprints or other kinds of dirt on it.
12 VQT4B72 (ENG)