Panasonic DMC-TS20A, DMCTS20K, DMCTS20D, DMCTS20R, DMCTS20A Waterproof/Dustproof Performance

(Important) About the Waterproof/

Dustproof and Anti-shock Performance of

the Camera

Waterproof/Dustproof Performance

This camera’s waterproof/dustproof rating complies with the “IPX8” and “IP6X” ratings. Provided the care and maintenance guidelines described in this document are strictly followed, this camera can operate underwater, to a depth not exceeding 5 m (16 feet) for a time not exceeding 60 minutes. (¢1)

Anti-shock Performance

This camera also complies with “MIL-STD 810F Method 516.5-Shock”. The camera has cleared a drop test from a height of 1.5 m (5 feet) onto 3 cm

(0.1 feet) thick plywood. In most cases this camera should not sustain any damage if dropped from a height not exceeding 1.5 m (5 feet). (¢2)

This does not guarantee no destruction, no malfunction, or waterproofing in all conditions.

¢1 This means that the camera can be used underwater for specified time in specified pressure in accordance with the handling method established by Panasonic.

¢2 “MIL-STD 810F Method 516.5-Shock” is the test method standard of the U.S. Defense Department, which specifies performing drop tests from a height of 122 cm (4 feet), at

26 orientations (8 corners, 12 ridges, 6 faces) using 5 sets of devices, and passing the

26 orientation drops within 5 devices. (If failure occurs during the test, a new set is used to pass the drop orientation test within a total of 5 devices)

Panasonic’s test method is based on the above “MIL-STD 810F Method 516.5-Shock”. However, the drop height was changed from 122 cm (4 feet) to 150 cm (5 feet) dropping onto 3 cm (0.1 feet) thick plyboard. This drop test was passed.

(Disregarding appearance change such as loss of paint or distortion of the part where drop impact is applied.)

10 VQT4A80 (ENG)