Panasonic VQT4T99, DMCTS25A Handling of the camera, Press 2 to select Yes, and press MENU/SET

Page 11

Handling of the camera

Waterproofing is not guaranteed if the unit is subject to an impact as a result of being hit or dropped etc. If an impact to the camera occurs, it should be inspected (subject to a fee) by a Panasonic to verify that the waterproofing is still effective.

When the camera is splashed with detergent, soap, hot spring, bath additive, sun oil, sun screen, chemical, etc., wipe it off immediately.

Waterproof function of the camera is for sea water and fresh water only.

Any malfunction caused by customer misuse, or mishandling will not be covered by the warranty.

The inside of this unit is not waterproof. Water leakage will cause malfunction.

Supplied accessories are not waterproof.

Card and battery are not waterproof. Do not handle with a wet hand. Also, do not insert wet card or battery into the camera.

Do not leave the camera for a long period of time in places where temperature is very low (at ski resorts or at high altitude etc.) or very high [above 40 oC (104 oF)], inside a car under strong sunlight, close to a heater, on the beach, etc. Waterproof performance may be degraded.

About the [Precautions] demonstration display

([Requirements for Underwater use])

[Precautions] is displayed when the power is turned on for the first time after purchase, with the side door completely closed.

Please check beforehand to maintain the waterproof performance.

1Press 2 to select [Yes], and press [MENU/SET].

It will automatically skip to the clock setting screen if [No] is selected before it starts.

2Press 2/1 to select the picture.

2: Return to the previous screen

1: View the next screen

It can be forcefully ended by pressing [MENU/SET].

When it is forcefully ended while checking by turning the unit off or pressing [MENU/ SET], [Precautions] is displayed every time the power is turned on.

3After the final screen (12/12), press [MENU/SET] to finish.

When [MENU/SET] is pressed after the final screen (12/12), [Precautions] is not displayed from the next time the power is turned on.

This can also be viewed from [Precautions] in the [Setup] menu.

(ENG) VQT4T99 11

Image 11
Contents Digital Camera Carefully observe copyright laws If you see this symbolDear Customer Product Location Information for Your SafetyProduct identification marking Declaration of Conformity FCC NoteCertification and Compliance About the battery packAbout the battery charger Contents Conditions in which inner side of the lens may be fogged When inner side of the lens is fogged condensationBefore Use Lens or LCD monitor may be damagedDMW-BCM13PP Standard AccessoriesWaterproof/Dustproof Performance After the final screen 12/12, press MENU/SET to finish Handling of the cameraPress 2 to select Yes, and press MENU/SET Press 2/1 to select the pictureClose the side door securely Check before using underwaterRinse with water with the side door closed Using the camera underwaterCaring of the camera after using it underwater 14 VQT4T99 ENG Names and Functions of Main Parts NFC antenna Hdmi socket About batteries that you can use with this unit Charging the BatteryAbout the Charge indicator Confirm that there is no foreign object Inserting and Removing the Card optional/the BatteryPress camera ON/OFF button Sequence of operationsPlaying Back Pictures Setting the MenuAbout the LED Light Setup Recording Motion PicturesAbout the GPS Recording using the GPS functionReceiving signals from GPS satellites About the Icon indicating positioning status Acquiring of the GPS informationWhen used during overseas travel etc Update the GPS informationAltimeter Sensors compass/altimeter/barometer are operatedPress 3/4 to select ON, and then press MENU/SET CompassRemote Shooting Installing the smartphone/tablet app Image AppTouch the smartphone/tablet to Camera Again Compatible modelsNFC function About NFC function Connecting to a smartphone/tablet Changing the connection method Select on a smartphone/tablet Select on the smartphone/tabletFor Windows Installing supplied software Specifications LCD monitor DimensionsMass weight TemperatureAltitude Bearing sensorAtmospheric Pressure/altitude Sensor PressureVoltage/capacity V/1250 mAh Battery Pack lithium-ion Panasonic DMW-BCM13PPInput To 240 V, 50/60 Hz, 0.2 a Output V, 0.65 a Operating Equipment mobilityDescription Digital Camera Accessory SystemVisa Digital Camera Accessory Order FormProduct or Part Name Parts Labor Limited WarrantyLimited Warranty Coverage For USA and Puerto Rico Only Mail-In ServiceLimited Warranty Limits And Exclusions For hearing or speech impaired TTY users, TTY Customer Services Directory United States and Puerto RicoHdavi Control is a trademark of Panasonic Corporation