Panasonic VQTB0088D, F0205Y0 manual Other Set Display, Scan Synchro Scan

Page 39

5Other Set Display

GContrast Adjustment

[Contrast (Gamma): Low, Mid, High] Contrast can be adjusted to any of three levels.

HElectronic Shutter Setting [Shutter Speed: OFF, 1/100 to 1/10000, S/Scan, Auto ND]

OFF: Electronic shutter is turned off.

1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000: Electronic shutter operates at one of these speeds as selected.

S/Scan (Synchro Scan):

Electronic shutter operates at the speed set with the electronic shutter synchro-scan setting.

Auto ND: Electronic shutter is controlled to automatically adjust the luminance.

Notes

•In case of using the RCU (RCB), none of the shutter speeds

— 1/250, 1/2000, 1/4000, and 1/10000 can be selected.

•In case of using the hybrid control panel, only OFF, 1/100, or Auto ND (ELC) can be selected.

•If the lens iris switch is at M (Manual) when operating the camera alone or when the iris switch on the RCU (RCB) is at AUTO, Auto ND may not function. Set the lens iris switch to A (Auto).

•Flickering may increase at Auto ND under fluorescent lights.

•Auto ND is automatically selected if Auto ND (ELC) setting is set to ON.

IElectronic Shutter Synchro Scan Setting [Synchro Scan: 60.34Hz to 15.75kHz]

This setting is possible only when Electronic Shutter setting is at S/Scan.

Horizontal bar noise can be reduced by synchro-scan adjustment in shooting workstation scenes, for example.

❈For luminance settings at each shutter speed and synchro-scan shutter speed, refer to the table below.

Shutter Speed

Synchro-scan

Required luminance ratio

 

 

 

 

OFF

—

 

1

 

 

 

 

1/100

100.3

Hz

2

 

 

 

 

1/250

250.0

Hz

4

 

 

 

 

1/500

492.2

Hz

8

 

 

 

 

1/1000

984.4

Hz

16

 

 

 

1/2000

1.969 kHz

32

 

 

 

1/4000

3.938 kHz

64

 

 

 

1/10000

7.875 kHz

160

 

 

 

 

JCCD Read Out Mode Setting [V Resolution: Normal, Fine]

Normal: Normal image. (CCD storage will be by field storage.)

Fine: Vertical resolution increases. (Vertical resolution is raised without increasing residual images by frame storage and Electronic shutter.)

Normal is recommended for general use because sensitivity will decrease at the Fine setting.

-39-

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Convertible Camera AW-E860NRisk of Electric Shock Do not Open FCC NoteImportant Safety Instructions Contents Preface Features Special notes on operation DON’TS PrecautionsDOS Major operating controls and their functions Front viewSide view Cooling fan Lens mountLens fixing ring knob Mounting holeNO/BAR switch NO/BAR Menu switch MENU/AITEM/AWC switch ITEM/AWC/S YES/ABC switch YES/ABC/+@ G/L input connector G/L Remote connector I/F Remote= Power indicator DC 12 V input connector DC 12VLens mounting MountingCamera mounting Flange back adjustment For zoom lens Iris gain control in a lens Automatic iris power zoom lensConnections $ Connection of device with a composite input connector$ Connection of a remote control unit RCU $ Connection of a remote control box RCB An example of connection for VBS/BB input Color lock mode $ Connection with multiple cameras Color lock mode$ Connection of devices with camera pan/tilt control system $ Connection of computer$ Automatic white balance control AWC AdjustmentAdjustment by Camera Adjustment with the RCU RCB, Hybrid control panel$ Manual white balance setting $ Automatic tracking white balance setting ATWAdjustment with the RCU RCB $ Black balance adjustment $ Reset to 3200K or 5600K white balanceAdjustment with RCU RCB, Hybrid control panel $ Total pedestal level adjustmentHorizontal phase control $ Gen-lock adjustmentColor phase adjustment Use mode setting $ Use Mode Setting$ Setting by camera Hybrid control panel $ Setting by RCU RCB or hybrid control panelMenu item setting $ Menu item settingMain menu screen From RCU RCB $ Setting$ Changing the Language setting From the camera alone2Color Set Display 4Sharpness DTL Set Display $ Sub menu Halogen Mode, Fluorescent Mode, Outdoor Mode1Brightness Set Display Auto ND ELC Setting Auto ND ELC OFF, onAuto Gain Up Control Setting Auto Gain Up OFF, on Eye L Night Eye LEye H Night Eye H AWC A, AWC B Color Set Display? Subcarrier Phase Fine Adjustment SC Fine -511 to +511 @ Color Bar Setup Setting Color Bar Set 0.0 IRE, 7.5 IREL, Color Bar Set Display Detail Level Setting Level OFF, Low, High Noise Suppress Level Setting Noise Suppress OFF, Low, HighSharpness DTL Set Display CCD Read Out Mode Setting V Resolution Normal, Fine Other Set DisplayScan Synchro Scan Language Selection Language English, Japanese 9Detail Set Display $ Sub menu User ModeColor Matrix Set Display Other Set Display $ Setting and changing of the setting items User Mode Auto Iris Level Fine Adjustment Auto Iris Adjust OFF, onIris, Shutter, Gain Set Display Scan Synchro Scan Gain Setting Gain Auto, 0 dB to 30 dB, N/Eye L, N/Eye H Color Set Display Pedestal, B Pedestal Detail Set Display Subcarrier Phase Fine Adjustment SC Fine -511 to +511` Color Bar Setup Setting Color Bar Set 0.0 IRE, 7.5 IRE Detail Band Setting Detail Band 1 toNoise Suppress Level Setting Noise Suppress 1 to Level Dependent Level Setting Level Dependent 0% to 25%Dark Detail Level Setting Dark Detail 0 to Gain Phase Varies the hue of the cyanColor Matrix Set Display Color between magenta and redOther Set Display Zebra Level Setting Level 70% to 110% Setting and changing the optional cardsOptional Card Setting Sub Menu Zebra Indicator Setting Zebra OFF, on$ Setting to initial set Setting to initial setOutdoor mode Halogen, Fluorescent, Outdoor ModeUser mode User ModeWhen the optional card is inserted to the camera Unit inch mm AppearanceSource voltage Power consumption 15.4 W SpecificationsDimensions W!H!D Input/Output connectors Video OUT BNC connectorIndicator Allowable temperature rangesRubber sheet Screw Mounting adapter Mounting spacer Standard accessoriesPanasonic Broadcast & Television Systems Company

VQTB0088D, F0205Y0 specifications

The Panasonic F0205Y0 and VQTB0088D are premium components designed to elevate various electronic applications, showcasing Panasonic's commitment to innovation and quality. These models embody advanced technologies and features that cater to a wide range of consumer needs.

The F0205Y0 is a highly efficient power supply module that offers an impressive energy conversion ratio. It is designed for optimal performance in industrial and consumer electronics. One of its standout features is its wide input voltage range, making it adaptable to different power environments. The built-in protection mechanisms, including overvoltage and overcurrent protection, ensure the device operates safely even under adverse conditions. Additionally, the compact design allows for easy integration into various systems, saving valuable space in equipment layouts.

Moreover, the F0205Y0 employs Panasonic’s cutting-edge thermal management technology, which enhances durability and longevity. Superior heat dissipation techniques help maintain operational efficiency, preventing overheating that can damage components. This is critical in applications that require continuous operation, such as telecommunications and automated manufacturing.

On the other hand, the VQTB0088D is a state-of-the-art sensor module that is integral for IoT applications. This sensor utilizes advanced MEMS (Micro-Electro-Mechanical Systems) technology to achieve high sensitivity and accuracy in detecting environmental parameters. Its primary features include low power consumption, making it ideal for battery-operated devices.

The VQTB0088D also features wireless connectivity options, enabling seamless integration into smart home and industrial automation systems. This connectivity capability facilitates real-time monitoring and data analytics, crucial for enhancing operational efficiency and decision-making processes. Its small form factor makes it versatile, allowing it to be embedded in various devices without compromising size or function.

Both the F0205Y0 and VQTB0088D highlight Panasonic's dedication to sustainability through energy efficiency and compact design. Their innovative features ensure they meet the demands of modern applications while supporting a greener future. In summary, these models exemplify Panasonic's leadership in electronic technology, contributing to advanced solutions across multiple sectors.
Top Page Image Contents