Panasonic PV310 manual User-Friendly Interface, Rich Information Display, Menu Background Settings

User-Friendly Interface

An operation keypad makes configuration as easy as child's play.

The color display is easy to read and allows you to grasp information quickly.

Rich Information Display

The high performance VGA monitor displays inspected objects on the screen with high fidelity. Operations and settings can be carried out easily via the pull-down menus and keypad.

Readability has been improved by displaying guidelines and character information in color and using a large character font. In addition, parallel inspection output results can be monitored in color.

Status Display Area

Currently Selected Model Number,

Model Title and Shutter Speed

Currently Displayed Image Type

Message Area

Displays various messages, sub-windows for checker settings and checker test results.

Overall Judgment Result

Displays OK (in green) when the output judgment meets the judgment requirements set in "Overall Judgment"

Signal Output Status

When the following signals are output, the box below each signal is illuminated. (RUN mode only)

R:READY signal

E:ERROR signal 1~8: D1 to D8 signals

Execution Time

Menu Bar

Displays menus for setting inspection conditions and the inspection environment.

Screen Display Area

<RUN mode>

Displays images, checker areas, inspection results, etc. depending on the settings in Settings Mode.

<Settings Mode> Displays images, checker areas, etc.

Settings windows called from the menu bar are also displayed in this area.

Menu Background Settings

A semi-transparent mode, allowing operations to be carried out while viewing captured images, and a fill mode, which blocks out background colors, are both supported. You can select the menu background color and set it as default.

Operation

keypad

Just position the cursor on a menu item and press <Enter>.

Semi-Translucent Mode Fill Mode

Data Monitor

Up to 50 inspection results can be displayed in a list on the monitor, allowing the operator to check the results on the monitor. Threshold adjustment (upper and lower limit values) can also be changed on the data monitor without having to enter them in the settings menu. The size and display position can also be changed.

The PV310 can be used for a wide range of applications where high-speed processing is required, e.g. inspecting:

Applications

Presence/absence of parts

Part size

Part orientation

Presence/absence of date or serial no.

Product nameplate label

Remote control switch printing Cap tightness

Logo mark printing

Flat cable width

Label position

Debris/dirt on part

7-segment illumination

Substrate positioning Metal part picking, etc.

5