Panasonic VQT0U14 When Pictures cannot be Transferred, Check the following items first

Page 26

Others

When Pictures cannot be Transferred

•When pictures cannot be transferred using the USB connection cable, use the following procedures.

∫Check the following items first.

Is [USB MODE] in the [SETUP] menu set to [PC] on the digital camera side?

When Windows 98/98SE is used, install the USB driver (P6), then connect the cable.

If the PC in use has two or more USB ports, connect the USB connection cable to other USB ports in turn.

•If you connect the digital camera to a USB port of the PC’s keyboard, normal operation may not result.

•If you connect the digital camera using a USB hub or USB extension cable, normal operation is not guaranteed.

Is there a Card inserted into your digital camera? Or, are there pictures on it?

Are the pictures already transferred to the PC?

•You cannot transfer the same pictures more than once.

∫Pictures cannot be acquired

even after the above checks.

Make sure that [Removable Disk] is added in [My Computer].

• Drive letters (e.g., H:) may vary depending on PC.

If the removable disk is not added, perform the following operations.

1Click [Start] >> ([Setup] >>) [Control Panel], and double-click [System].

2Click ([Hardware] >>) [Device

Manager], and check that [Other Devices] is displayed.

3If [Other Devices] is displayed, delete it.

•If it is not displayed, check the connection. (P8)

4Return to the original screen, and turn off the PC.

5Disconnect the USB connection cable

from the PC.

6Turn on the PC to start it.

7Install the USB driver again. (For

Windows 98/98SE only)

8Connect the USB connection cable to the PC.

•Check that a [Removable Disk] is added again. If a [Removable Disk] is not added, repeat the above steps.

26

VQT0U14

Image 26

Contents Operating Instructions PC Connection for Sharing and Printing Contents Term Explanation Read Before UseKey terms Macintosh Is Simple Viewer compatible with any PC?Windows If the setup menu does not start automatically Installing the SoftwareInstalling the USB driver Windows 98/98SE only Insert the CD-ROMInstalling Simple Viewer If Simple Viewer cannot be installedConnecting the Digital Camera to PC Preparations on the digital camera sideTransfer destination folder When you click Cancel during transferTransferring pictures to the PC Acquire to PC Select View Select the location where pictures are savedViewing pictures View Select a folder, and in thumbnail view, select any pictureHow to use the View screen Print 1 byFull screen display Printing pictures Print Select PrintTwo sheets, Four sheets, Eight sheets Set up printing, and click NextClick Add and then click Next IndexCheck the layout, and set up printing Click Start printingSelect Send by e-mail Select any location where pictures are savedSending pictures by e-mail Send by e-mail Click Send by e-mail E-mail program does not start automaticallySelect any function to be used AdvanceSelect Advance Click Start Click OK, and then click Completion to complete the additionClick Write Writing to the card is carried outFolder to be acquired Select Setting Set the settings and click OKDefault Automatic acquisitionAfter Using Simple Viewer To exit Simple Viewer Click ExitTo disconnect the USB connection cable safely To Transfer Picture without Using Simple ViewerWhat is a drag-and-drop operation? How to Use with Macintosh To make sure that the digital camera is connected correctlyHow to Remove the USB Driver and Simple Viewer Uninstall Pictures cannot be acquired Even after the above checks When Pictures cannot be TransferredCheck the following items first Troubleshooting About printing Question Answer Others Question Answer Lumix Simple Viewer Operating EnvironmentUSB-connectable environment Others Spanish Install Guide Guía de instalación de españo Instalación del controlador USB sólo Windows 98/98SEInstalación de Simple Viewer Si Simple Viewer no se puede instalarOthers Memo Panasonic Puerto Rico, Inc