Panasonic DMC-G6 owner manual Wi-Fi Setup Menu, 288

Wi-Fi/NFC

[Wi-Fi Setup] Menu

Configure the settings required for the Wi-Fi function.

[Wi-Fi Setup] cannot be changed when connected to Wi-Fi. (excluding [Network Address])

Select the menu.

[MENU] > [Setup]>[Wi-Fi]>[Wi-Fi Setup]>Desired item to be set

[LUMIX CLUB] Acquires or changes the “LUMIX CLUB” login ID.

•Refer to P274 for details.

[PC Connection]

You can set the workgroup.

To send images to a PC, a connection to the same workgroup as the destination PC is required.

(The default setting is “WORKGROUP”.)

[Change Workgroup Name]:

Enter the workgroup of the connecting PC. Exit the menu after it is set.

[Restore to Default]: Restores the default state.

Confirmation screen is displayed. It is executed when [Yes] is selected.

Exit the menu after it is executed.

•For details on how to enter characters, refer to “Entering Text” section on P64.

•If you are using the PC with standard settings, you do not need to change the workgroup.

[Device Name]

You can change the name of this unit.

1Press [DISP.].

2Enter the desired device name.

•For details on how to enter characters, refer to “Entering Text” section on P64.

•A maximum of 32 characters can be entered.

[External AV device]

Images can be sent to the AV device of relatives and acquaintances via “LUMIX CLUB”.

•Refer to P279 for details.

[NFC Operation]

Configures the settings for the NFC function.

[ON]:

NFC function is worked.

[OFF]

288