Preparation
Setup | 6 Setting date and time |
|
When the unit is turned on for the first time, a message asking you to set the date and time will appear.
Select [YES] and perform steps 2 to 3 below to set the date and time.
¬Change the mode to or .
1 Select the menu.
MENU : [SETUP] # [CLOCK SET]
2 Touch the date or time to be set, then set the desired value using / .
ADisplaying the World time setting:
[HOME]/ [DESTINATION]
≥The year can be set between 2000 and 2039.
≥The
≥The date and time function is driven by a
≥When this unit is purchased, the clock is set. If the time display becomes [-
6 months. (The battery is still being recharged even if the power is off.)
3 Touch [ENTER].
≥The clock function starts at [00] seconds.
≥A message prompting for World time setting may be displayed. Perform the World time setting by touching the screen.
≥Touch [EXIT] or press the MENU button to complete the setting.
23
(ENG) VQT2M64