With a PC
Setup | 2 Connecting to a PC |
|
≥Connect this unit to the PC after the software applications are installed.
≥Remove the supplied
AUSB cable (supplied)
1 Connect this unit to the AC adaptor.
≥It is possible to use it connected to the PC with the batteries only, but you will not be able to write data into the unit.
2 Turn on the unit.
≥This function is available in all modes.
3 Connect this unit to a PC.
≥The USB function selection screen will appear.
4 Touch [PC] on the screen of this unit.
≥The Smart wizard screen is automatically displayed when HD Writer AE 2.5S is installed.
≥This unit is automatically recognised as an external drive of the PC. (l94)
≥When you select an option other than [PC], reconnect the USB cable.
≥When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen to turn the LCD monitor on.
92
VQT2Z66