Panasonic HDC-TM99 Charging the battery, Connect the AC adaptor to the DC input terminal

Page 9

Charging the battery

When this unit is purchased, the battery is not charged. Charge the battery fully before using this unit.

The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet.

Important:

≥Use the supplied AC adaptor. Do not use the AC adaptor of another device.

≥Do not use the AC cable with any other equipment as it is designed only for this unit. Also, do not use the AC cable from other equipment with this unit.

≥The battery can also be charged using a battery charger (VW-BC10E; optional).

≥The battery will not be charged if the unit is turned on.

≥It is recommended to charge the battery in a temperature between 10 oC to 30 oC. (The battery temperature should also be the same.)





ADC input terminal

≥Insert the plugs as far as they will go.

1 Connect the AC adaptor to the DC input terminal.

≥Be careful not to pinch the DC input terminal cover.

2 Connect the AC cable to the AC adaptor, then the AC outlet.

≥The status indicator will flash red at an interval of 2 seconds, indicating that charging has begun.

It will turn off when the charging is completed.

∫Connecting to the AC outlet

It is possible to use this unit with power supplied from the AC outlet by turning on the unit with the AC adaptor connected.

9

(ENG) VQT3J65

Image 9

Contents HDC-SD99 HDC-TM99 Concerning the battery Information for Your SafetyEMC Electric and magnetic compatibility Product identification markingAbout connecting to a PC These symbols on Products, packaging,About the recording format for recording motion pictures Indemnity about recorded ContentCards that you can use with this unit For the purposes of these Operating instructionsContents Accessories RP-CDHM30 Optional accessoriesInserting/removing the battery Power supplyRemoving the battery ≥ Press the power button to turn off the unit. lConnecting to the AC outlet Charging the batteryConnect the AC adaptor to the DC input terminal Connect the AC cable to the AC adaptor, then the AC outletCharging and recording time Battery capacity indicationRecording to a card Cards that you can use with this unitCard Check that the access lamp has gone off Access lamp Access aInserting/removing an SD card Securely close the SD card coverTurning the unit on and off with the power button Selecting a modeOperate the mode switch to change the mode to , or Indicator goes offTouch How to use the touch screenSlide while touching About the operation iconsAbout the touch menu Recording modeTouch left side/ right side of on the touch menu To display the touch menuDisplaying the World time setting Setting date and timeSelect the menu. l Touch EnterChange the mode to or Select the menu. l Intelligent auto modeSelecting a media to record HDC-TM99 Intelligent auto/Manual buttonChange the mode to Open the LCD monitor Recording motion picturesRecording still pictures Motion picture/Still picture playback Change the mode to Touch the play mode select icon A. lSelect the VIDEO/PICTURE you wish to play back Select the Media and VIDEO/PICTURE you wish to play backConnect this unit to a TV Watching Video/Pictures on your TVLanguage selection Using the menu screenFormatting Zoom in/out functionZoom lever/Zoom button icons Select the menuSpecifications Hdmi mini connector video output level White balance adjustmentDimensions Image stabilizer function3D Conversion Lens optional Operating temperatureMass Mass in operationStill pictures Motion picturesInformation for your safety About copyright Carefully observe copyright LawsLicenses If using the following OS