2 3 | 1 |
1
2
Charging the Battery
Charge the Battery before using it.
1 Attach the Battery.
≥Align the Battery with line 1 and push it in the direction of the arrow while holding it down.
2 Securely connect the AC Power Cord to the AC Adaptor and an AC mains jack.
≥The [POWER] Lamp 2 lights and then the [CHARGE] Lamp 3 flashes and charging starts.
≥If the [CHARGE] Lamp 3 does not flash even though the Battery is attached, remove the Battery and then re- attach it.
∫Charging Lamp [CHARGE]
Flashing: | During charging |
Lit: | The Battery can already be used to |
| operate the Movie Camera but it is not |
| yet fully charged. |
| (Approx. |
Off: | The Battery is fully charged. |
∫Removing the Battery
Slide it in the opposite direction of that indicated in step 1 above.
≥Charge the Battery at a room temperature between 10xC and 30xC.
≥When charging, do not connect the DC Input Lead to the AC Adaptor.
≥During recording or charging, the Battery becomes warm. However, this is normal.
≥If you charge the Battery when it is not yet discharged, the [CHARGE] Lamp 3 may flash briefly and then go out. This indicates that the Battery is fully charged. Therefore, this is not an indication of a malfunction.