Panasonic NV-GS27GN operating instructions Before requesting repair Problems and solutions

Page 36

LSQT1008ENG.book 36 ページ ２００６年１月１８日 水曜日 午前１０時４分

Others

Before requesting repair (Problems and solutions)

Power/Body

1:The movie camera power cannot be turned on.

•Is the battery fully charged? Use a fully charged battery.

•The battery protection circuit may have operated. Attach the battery to the AC adaptor for 5 to 10 seconds. If the movie camera still cannot be used, the battery is faulty.

•Is the LCD monitor open or the viewfinder

extend?

2: The movie camera power is turned off automatically.

•If you set [POWER SAVE] to [5 MINUTES] and do not operate the movie camera for about

5 continuous minutes, the power is automatically turned off for tape protection and power conservation. To resume recording, turn the [OFF/ON] switch to [OFF]. Then turn it to [ON] again. (-32-) Also, if you set

[POWER SAVE] to [OFF], the power does not

automatically turn off.

3: The movie camera power does not stay on long enough.

•Is the battery low? If the remaining battery power indication is flashing or the message “LOW BATTERY” is displayed, the battery has run down. Charge the battery or attach a fully charged battery. (-7-)

•Has condensation occurred? When you carry the movie camera from a cold place into a warm place, condensation may occur inside it. If so, the power is turned off automatically, disabling all operations except for taking cassettes out. Wait until the condensation

indication disappears. (-38-)

4: Battery runs down quickly.

•Is the battery fully charged? Charge it with the AC adaptor. (-7-)

•Are you using the battery in an extremely cold place? The battery is affected by ambient temperature. In cold places, the operating time of the battery becomes shorter.

•Has the battery worn out? The battery has a limited life. If the operating time is still too short even after the battery is fully charged, depending on the usage, the battery has worn out and can no longer be used.

5:The movie camera cannot be operated though powered up.

The movie camera does not operate normally.

•The movie camera cannot be operated unless you open the LCD monitor or extend the viewfinder.

•Remove the cassette and then press the

[RESET] button. (-38-) If normal conditions are not restored yet, turn off the power. Then, about 1 minute later, turn on the power again.

6: The cassette cannot be removed.

•Does the status indicator comes on when opening the cassette cover? (-12-) Make sure that the battery and the AC adaptor are properly connected. (-7-)

•Is the battery in use discharged? Charge the battery and remove the cassette.

•Close the cassette cover completely, and fully open it again. (-12-)

7: No operation other than cassette removal can be performed.

•Has condensation occurred? Wait until the condensation indication disappears. (-38-)

Recording

1:Recording does not start although power is supplied to the movie camera and the

cassette is correctly inserted.

•Is the accidental erasure prevention slider on the cassette open? If it is open (set to [SAVE]), recording cannot be performed. (-12-)

•Is the tape wound to the end? Insert a new cassette.

•Is the recording mode set? When in the playback mode, recording cannot be performed. (-17-)

•Has condensation occurred? No operation other than cassette removal can be performed when condensation occurs. Wait until the condensation indication disappears. (-38-)

•Is the cassette cover open? If the cover is open, the movie camera may not operate normally. Close the cassette cover. (-12-)

2: The screen has changed suddenly.

•Has the demonstration started? In the Tape Recording mode, if you set [DEMO MODE] >> [ON] without inserting a cassette, the demonstration starts. For normal use, set this

function to [OFF]. (-33-)

3: A cassette cannot be inserted.

•Has condensation occurred? Wait until the condensation indication disappears.

36

LSQT1008

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Operating Instructions Information for your safety Contents Before using AccessoriesOptional Parts identification and handlingLCD monitor open part Open Reset button Reset -35-,-38 Tripod receptacleShoulder strap fixture Adjust the belt length Fitting the lens capGrip belt Power supply How to turn on the power How to turn off the powerCharging time and recordable time Turning the camera onSetting date and time About date/timeUsing the LCD monitor Using the viewfinderRecharging the built-in lithium battery Adjusting the field of viewTo cancel Quick Start ≥Set to Tape Recording ModeQuick start Open the LCD monitor or extend the viewfinderWhen the cassette holder does not Come out When the cassette holder cannot be HousedInserting/removing a cassette Accidental erasure preventionSelecting a mode How to use the joystickBasic joystick operations Joystick and screen displayHelp mode To exit the Help modeTape Playback Mode Switching the language Using the menu screenAbout the menu setting To exit the menu screenAdjusting LCD monitor/viewfinder Adjusting the brightness and colour LevelEVF Brightness of the viewfinder Record mode Check before recordingOn-screen display in the tape recording mode Recording on a tapeRecording check Concerning the remaining tape time Indication on the screenBlank search function Recording a still picture on a tape PhotoshotStopping blank search midway Through Continuous photoshotZoom in/out function Recording yourselfDigital zoom function About the variable speed zoom FunctionTo cancel the colour night view Function Backlight compensation functionColour Night view function To return to normal recordingSoft skin mode To cancel the soft skin modeTo cancel fading Fade in/fade out functionTo cancel the wind noise reduction Function To cancel the Cinema functionWind noise reduction function Recording images for wide-screen TVsRecording in various situations Scene mode To cancel the image stabilizer functionImage stabilizer function To cancel the scene mode function Recording in natural colours White balanceMove the joystick up to select the white balance icon Manual focus adjustment To restore to the automatic AdjustmentTo set the white balance manually About flashing of the indicationManual shutter speed/aperture adjustment To restore to automatic adjustmentShutter speed range Iris/gain value rangePlayback mode To adjust volumeSettings on the audio Playing back tapeFrame-by-frame playback Playback on TVTo return to normal playback Edit mode Using the DV Cable for Recording Digital DubbingCopying onto a DVD recorder or a VCR Dubbing Menu Menu listTape Recording Menu Tape Playback MenuMenus related to taking pictures Menus related to playback Other menusOthers IndicationsFunctions cannot be used simultaneously Wrong Tape FormatBefore requesting repair Problems and solutions Auto focus function does not work Remaining tape time indication disappearsDifferent sounds are reproduced at the same time Sounds cannot be played backPush the Reset Switch is displayed When the lens is foggedAbout condensation Remove the tape if it is insertedAbout dirty heads About the movie cameraWhile carrying the movie camera, do not drop or bump it About the battery About the AC adaptorAbout the cassette Explanation of terms Periodical check-upsAutomatic white balance White balance Auto focusSpecifications SpecificationsF0106Nm0 5100 a

NV-GS27GN specifications

The Panasonic NV-GS27GN is a compact and versatile digital camcorder that exemplifies the innovation and quality associated with the Panasonic brand. Targeted toward both amateur videographers and budding content creators, the NV-GS27GN integrates advanced technologies and user-friendly features, making it an appealing choice for capturing precious moments.

One of the standout features of the NV-GS27GN is its 3CCD imaging system. Unlike traditional single-chip camcorders, the 3CCD system enhances color accuracy and delivers stunning image quality. Each of the three CCD sensors captures the primary colors—red, green, and blue—separately, allowing for rich, vibrant videos with minimal color distortion. This technology is particularly effective in various lighting conditions, ensuring that users can achieve professional-grade results.

The camcorder boasts a powerful 24x optical zoom, which enables users to get close-up shots without sacrificing detail. Coupled with a digital zoom of up to 1000x, the NV-GS27GN provides remarkable flexibility for different shooting scenarios, from wide-angle landscapes to tightly framed portraits. The built-in optical image stabilization technology further ensures that shaky hands do not translate into shaky footage, making every video smooth and visually appealing.

Another significant characteristic of the NV-GS27GN is its intuitive LCD touchscreen interface. The 2.7-inch display allows for easy navigation of settings and playback, enhancing the overall user experience. The inclusion of advanced features like face detection autofocus enables the camcorder to automatically focus on the subject's face, producing sharp and well-defined images.

For those who wish to edit their videos post-capture, the NV-GS27GN supports multiple recording formats, making it easy to transfer and work with footage. Its SD card slot provides ample storage options, allowing users to record hours of high-quality video without the need for frequent media changes.

Additionally, the camera includes a host of creative features, such as various scene modes, built-in digital effects, and the ability to capture 1.2-megapixel still images, bridging the gap between photography and videography.

Overall, the Panasonic NV-GS27GN stands out as a reliable and feature-rich camcorder. Its combination of advanced imaging technology, ease of use, and flexibility makes it a perfect companion for anyone looking to document life’s unforgettable moments with clarity and style.
Top Page Image Contents